Instruction
1
Whichever method you choose, you first need to determine the length of the pants. Put on the pants and the shoes, where you plan to go often. Pant length should reach the heel or be a little higher. Lock the pins to the correct length.
2
Lay the pants on the big table, measure the desired length on both parts of the pants and cut the bottom, leaving a margin of 3-5 cm the Edge you need to neaten.
3
If you use a needle or a sewing machine you don't like, for you, the most convenient option - the so-called "spider" or adhesive tape, which is sold in any sewing store. For white pants, choose white, and for dark color is unimportant, since the adhesive tape will still not be visible (in white trousers, a dark tape can Shine through). Fold the pants at the marked line, put in ACC tape cobweb and carefully press from both sides: the high temperature tape as it melted and proslaivaet ACC. This method is not suitable for too thick and stretch fabrics. Another disadvantage of the webs is that with frequent washings, it can come off.
4
The other way is to stitch the hem a hidden seam. This method is suitable, for example, woolen fabrics, where it is easy to introduce a needle so that it is imperceptible from the front side.
5
Jeans and other cotton fabrics it is best to stitch on the machine.
6
Men's classic pants are usually stitched with Trouser braid. Noting the line of bending, you need to pritchet braid at 0.2 cm above this line (i.e., to the braid "came" for the ACC). Then fold the pants, leaving the front side 0.2 cm of braid. This is done so that during wear the cloth on the trousers did not wear out. Prometeia and Tutuila. Then lock the bending of the adhesive tape, or hem by hand.
Useful advice
When shortening is best not to use double ACC - it makes the bottom a thick and stands out on the pants. It is better to neaten the edge and to do the open (single) ACC.
