How to sew a Palazzo pants from long skirts

Pull out your old summer pants with a mid rise. They will serve you a sample of the future product. Measure the length of the leg from the groin to the edge on the inner side and record the measurements seam. Measure the length of pants from waist to hem. Lock it on paper.

Put a Maxi skirt on the big table. Measure it's length. Mark on the skirt with chalk the size of the seam. If the skirt longer or shorter trousers, make a corresponding amendment in the groin area. It is better to leave the Palazzo pants a higher rise.

Take the scissors, carefully cut the skirt along the line of the front and rear. The edges of the cut on the machine sewn seam with zigzag or serger.

Turn the product inside out. Baste the fabric by hand. Try Palazzo pants before to stitch them on the sewing machine. Make sure that they will sit well on your figure.

Start to sew the product on the machine with the lower internal part of the leg. Secure beginning of seam reverse stitching. Leave approximately 1 cm of fabric to the seam allowance. Groin several times sew reverse stitching. Prostrochite second pant leg from top to bottom. Don't forget to pin this thread.

Remove the pants on the front side and try them. Palazzo pants are ready!