How to sew boxers

Underwear, lovingly made with your own hands - something quite rare today. To buy the necessary piece of clothing easier and faster in the nearest clothing store. However, the handmade looks very cozy and can be a wonderful gift. Try to sew the family briefs for the beloved wife – he'll definitely appreciate your efforts. One of the easiest ways of their tailoring involves only two elements cut.

You will need

- cotton fabric;
- tailoring meter;
- graph paper;
pencil;
- scissors;
- threads;
needle;
- sewing machine;
- iron
- elastic band;
- the pin.

Instruction

Make pattern boxers cut from cotton cloth. It will consist of the front and rear halves. The easiest way to base parts cut old product of the right size and thrust it at the seams. If there is a certain skill you can draw your own drawing of the future of clothing. It is necessary to consider the following points:find out the length of future products, the coverage of the hips and waist. Note the allowance for loose fit at the hip line. It can be from 2 to 8 cm, depending on the individual characteristics of the future owner things. Make a drawing of the boxers on the graph paper, so it was more accurate.

Fold half the working fabric and put it on a finished pattern of the two parts of the future product. If you carefully align the fold of the fabric slices are cut parts, you do not have to perform side seams. Trace the drawing on the contour of the solid line and dotted line mark the seam (1.5 cm wide). Two the finished part cut must be perfectly symmetrical.

Follow these step-by-step seam on my boxers at the inner line of the thigh. Put the right detail of the product face down and gently tap it slices. Mark the seam line stitches by hand and treat on the sewing machine. Left half pant ssuite sides in the mirror. Undo this carefully remove.

Remove one half of the products there and put it in another part of the garment thus, to connect the upper, middle and lower sections of the two legs. Now you need to sew the two parts of the family of cowards in the middle.

You can achieve this using the so-called lapped seam. Make a small (8 mm to 1 cm) overhang the lower edge of the leg over the edge of the top part of his underpants. Gently fold the seam allowance around it the top part. For better fixation of the obtained bend iron hot iron. Run very smooth, fine line at a distance of not more than 5 mm from the fold. Expand the family pants on the front side and make the last of the median suture, which connects the inlet with a cloth.

You only have to handle the bottom edge of the boxers and drawstring top. Don't forget to leave it unsewn place for threading elastic tape.

Is the advice useful?