How to make a lighter from the socket

There are several ways of making lighter of shells, which we share with you. It would seem, what for, if around sells a variety of lighter? The fact that it may not always be at hand. But the skills making a home-made lighter never hurts. Following our instruction, you will be able to boast a self-made lighter.

Instruction

Method the first. Prepare sleeve, new Zippo (or look old), the burner and the copper-silver solder. Disembowel from Zippy the flint and pull out the drive that on it he strikes. Next, remove all the contents Zippy: disc holder, filter and gasket. All the contents of the frame and solder. Remove any roughness with a file, giving the correct form. Contents Zippy hammer welded into the sleeve, insert the wick and pour over gasoline. Lighter ready.

The second way. Prepare metal narrow tube. Do it in the hole for the wheel. In the hole for the wheel put a special flint for lighters with a spring. Flint should be with a small elastic. Fabricated of durable metal or alloy cap with a wick. Assemble the entire structure. Take an empty cartridge case. Prepared metal tube solder to the shell. Pour gasoline. Lighter ready.

The third way. Prepare the sleeve and cotton cord. Cut a small piece of cotton string and dip it into the sleeve, pre-moistened in gasoline to protect from moisture. The outer end of the wick to leave out to interact with the flint. Flint fabricate from a file. For this solder to the sleeve with a small piece of a file, size about 5 cm Fill in the liner of gasoline. Lighter ready.

Is the advice useful?