You will need
  • - padlock
  • - angle grinder (saw-grinder)
  • - discs for metal grinders
  • - paper clip or wire - 2 PCs.
  • - a balloon with liquid nitrogen
  • - hammer
  • - chisel
  • - crowbar-crowbar
Instruction
1
Install on the grinder disc for metal cutting and bring to the shackle of the lock. Turn on the saw and align the disk to the place where the shackle enters the grooves. Will perepelita her. Then remove the body to the side and remove the lock.
2
Take the wire or a few paper clips and unfold them in a straight line. Then bend the tip of the first letter G and insert in the lower part of the keyhole. Rotate the pick in different directions and determine where the lock opens. Turn in the desired direction and hold in place.
3
The second lock pick insert in the upper part of the keyhole. Try to feel it with the tip stariki inside the castle. Raise them one by one. Then rotate the first lock pick and open the lock.
4
Using a balloon with liquid nitrogen, treat the handle of the lock. Wait approximately 5 seconds. Place to frozen place the chisel, and then strongly and sharply hit it with a hammer a few times. Then re-treat the handle with liquid nitrogen and strike until then, until you crack. Send her a chisel and split the handle of the lock.
5
If the bow is near the lock is very thick or made of durable material, and you failed to break it, then fix the lock so that it is not loose in the hand (for example, preprite him to the door). Then treat the spot where the shackle connects to the lock body, liquid nitrogen. Wait 5 seconds. Put the chisel to this place and put strikes so that they had the lock body. Knock the shackle out of the housing, remove it to the side and remove the lock.
6
Take your crowbar and insert it into the opening between the shackle and the lock body. The end that you have in your hands, lift up, and the other end abut a wall below the castle. Fell with all my weight on the crowbar, sharply pull it down as long as the shackle will not come out of the grooves. Remove the body to the side and remove the locking of the loop.