Do not hurry to take in for repair or throw a washing machine which has ceased to merge water. If you check the drain pump and the hose running to him, gave nothing, it is possible that the problem lies in the pump.
It is recommended to dismantle it and to ensure that no foreign objects, integrity of the component parts of the pump.
Access the drain pump will depend on the type and brand of the machine, but regardless of its model, it is necessary to observe safety precautions and be sure to de-energize the equipment before dismantling the pump.
In order to remove a drain pump from a European washing machine Siemens, Bosch, AEG, dismantle the front panel of the housing.
To do this, you first need to remove the dispenser washing powder, slightly loosening the clamps and removing the cuff – then the spout is easy to pull out and allows access to the screw that holds the top part of the front panel.
To release screws from the lower part of the panel, remove the panel covering the drain filter.
Gently separate the connector connected to the locking device of the hatch, you can remove the front wall entirely and to access the pump.
Removing the pump starts with removing the wiring, open all latches and loosen the clamps attaching the discharge hose and nozzle of the tank.
Not to forget the location of the pump and clamps, it is recommended to take a photo or write on paper to avoid mistakes when mounting the pump.
Dismantling the back wall to access the pump found in washing machines Electrolux, Zanussi.
First we need to remove the top cover by removing the screws and sliding it back, then you will see the access screws back and side of the rear wall and to the fastening of the casing of the inlet valve.
After removing the wall, disconnect all wires and removed the "snail" part, in which is placed the impeller of the pump. Together with "snail" is dismantled and the pump and all the pipes.
The location of the pump, pipes, "snails" with respect to each other, it is desirable to photograph or record.
To separate the pump from the "snails" can be either rotation or loosening of the fixing bolts, depending on the specific model washing machine.
The easiest way to access the pump, since the bottom from washing machines or simply covered with a small panel, or completely absent. This kind of access is common in machines of the brands Indesit, Ardo, Candy, Samsung, LG.
Separating the panel covering the drain filter and remove the filter, access to the pump.
Next, you need to disconnect the wires from the pump and the "snail" of tube from the machine body. The position of the pump, snail, clamps and Spigots are recorded, remembered or photographed in order to avoid errors during reverse installation of parts.
It is recommended to dismantle it and to ensure that no foreign objects, integrity of the component parts of the pump.
Access the drain pump will depend on the type and brand of the machine, but regardless of its model, it is necessary to observe safety precautions and be sure to de-energize the equipment before dismantling the pump.
Access through the front wall
In order to remove a drain pump from a European washing machine Siemens, Bosch, AEG, dismantle the front panel of the housing.
To do this, you first need to remove the dispenser washing powder, slightly loosening the clamps and removing the cuff – then the spout is easy to pull out and allows access to the screw that holds the top part of the front panel.
To release screws from the lower part of the panel, remove the panel covering the drain filter.
Gently separate the connector connected to the locking device of the hatch, you can remove the front wall entirely and to access the pump.
Removing the pump starts with removing the wiring, open all latches and loosen the clamps attaching the discharge hose and nozzle of the tank.
Not to forget the location of the pump and clamps, it is recommended to take a photo or write on paper to avoid mistakes when mounting the pump.
Access through rear wall
Dismantling the back wall to access the pump found in washing machines Electrolux, Zanussi.
First we need to remove the top cover by removing the screws and sliding it back, then you will see the access screws back and side of the rear wall and to the fastening of the casing of the inlet valve.
After removing the wall, disconnect all wires and removed the "snail" part, in which is placed the impeller of the pump. Together with "snail" is dismantled and the pump and all the pipes.
The location of the pump, pipes, "snails" with respect to each other, it is desirable to photograph or record.
To separate the pump from the "snails" can be either rotation or loosening of the fixing bolts, depending on the specific model washing machine.
Access through the bottom of the washing machine
The easiest way to access the pump, since the bottom from washing machines or simply covered with a small panel, or completely absent. This kind of access is common in machines of the brands Indesit, Ardo, Candy, Samsung, LG.
Separating the panel covering the drain filter and remove the filter, access to the pump.
Next, you need to disconnect the wires from the pump and the "snail" of tube from the machine body. The position of the pump, snail, clamps and Spigots are recorded, remembered or photographed in order to avoid errors during reverse installation of parts.
