Instruction
1
Buy matches, if your brass plate no built-in igniter, and there is only a narrow tube made from the interior of the burner. This tube allows you to light the oven in the same way: turn the knob (tear gas) and bring a lighted match to the edge of the tube. Thereafter, if the light blew out a stream of gas, or the match is simply not extinguished, the burner lights up.
2
Use an external piezosurgical if the ring is readily accessible or the bottom plate is lifted, opening the access to the burner. The process is similar to the first option: turn the knob to the brass plate and press the button piezosurgery, dropping spark. Remember that initially, turn the knob during ignition of the matches should for a short distance, otherwise the flame goes out; when using piezosurgical the handle you can immediately twist into the desired position.
3
If the cooker is equipped with built-in electro/piezosurgery, to include a brass plate is possible by rotating the knob the gas feed to the required point and click pessaries — ring work. Most often, the resource internal piezosurgical limited and after a few months it stops working; light brass plate will have to manually.
4
Also, the stove can be equipped with automatic electrostatically triggered when turning the control knob to any great distance from the beginning. Automation is designed for start-spark immediately after starting gas to the burner of the oven. The mechanism on the burners will look different: the handle is necessary to turn sharply to the spark igniter was triggered during the gas feed, and not a second earlier (Housewives often out of fear, turn the knob slowly, thereby only releasing gas and exposing themselves to danger).