Advice 1: How to connect the steering wheel and pedals to the computer

The modern computer allows you to connect to yourself quite a lot of different devices, some of which turn into game center. Of course, plenty of joysticks, gamepads and other gaming devices will make your computer a favorite spot of children and sometimes adults.
How to connect the steering wheel and pedals to the computer
Instruction
1
In some cases, and to improve gaming "power" of your computer you should think about buying such modern gaming devices like steering wheel and pedals. After all, what could be better than to drive in new races, using the controls that are available this driver. Meanwhile, it is worth remembering that any computing device requires certain knowledge in order for it to connect properly, and sometimes configure.
2
Similarly, in order to connect the wheel and pedals to a computer, you'll need to spend some actions. First, it is worth checking out when buying these devices, how and to which port it is connected. Usually modern wheels with pedal kit connect one wire to an available USB port on your computer, however, you can ask the seller whether this is so.
3
You should also think about whether there is available on the computer that you want to equip such a gaming device that corresponds to an available USB port. Even if the computer is in use some time, usually all the ports are already occupied. They can be connected to the scanner, webcam, printer and many other devices. In this case, in order to connect the wheel and pedals to a computer, is purchase a USB hub that adds several ports available. In the case that not all ports are busy, there is nothing easier than to add a new gaming device, simply inserting the cable into the appropriate connector on the computer.
4
It is worth noting that usually difficulties with the connection does not happen. The only disappointment which can befall a racing enthusiast, is the lack of support for such control devices have your favorite game.

Advice 2: How to connect a controller

Xbox 360 – popular gaming console from Microsoft. This console is now quite popular among gamers because it is convenient and has excellent technical characteristics. The console is equipped with a wireless game controller or the gamepad. If you bought the Xbox, but I don't know how to connect the controller to the game console, then this tutorial will help you.
How to connect a controller
Instruction
1
Press the Guide button on your controller. Hold until, until the controller and game console.
2
The power button on the console itself just hit and release. Be quick for twenty seconds, press and release the connect button on the housing of the controller.
3
Wait until the indicator lights next to the power button on the console will not finish flashing. When they stop blinking, it would mean that the controller is connected.
4
In that case, if the controller does not turn on, check if the batteries. In your controller you need to use AA batteries. If they don't work, then insert a new one.
5
To power the controller, you can use a special device - Xbox 360 Play & Charge Kit or the Xbox 360 Quick Charge Kit.
6
One console can connect up to four controllers. So, if you want to connect more controllers to the console, repeat all steps for each controller. In this case, each of them is assigned a specific quadrant. Around the power button on the console and the Guide button on the gamepad are four LEDs that correspond to the quadrants.
7
In order to disable the controller, press the Guide button and hold for three seconds. After that, turn the controller off. If you turn off the console, the gamepad itself to reconnect the next time.
8
Also keep in mind that at one point the controller can be connected to a single console, and if you want to connect it to another console, the connection with the first have to interrupt.
9
If gamepad does not connect, then try to do the following: 1. Turn off the console, and after a minute turn it on again
2. Replace the batteries in your controller
3. All items that are between the controller and the console, get it, especially if these objects are sources of radiation – microwave ovens, televisions, mobile and cordless home phones, metallic and chrome-plated rack and .d.You have a good connection and good game!

Advice 3: How to connect your wheel to the game

To connect the wheel to the game, you don't have to have any specific knowledge – the connection is almost instant, you only need to customize the controls in the game any way you like.
Connecting the helm to the game
You will need
  • - computer
  • - steering wheel with pedals
  • the game, supporting the connection of such devices.
Instruction
1
Connecting the helm to the computer. To connect the wheel to the PC, just attach the USB cord to one of the available ports on your computer. After you do this connect to the steering wheel pedal and push the power supply into the socket. Now the wheel is connected to the computer.
2
Game setup for steering. Log in to the game, which supports the steering, and go to the settings menu. Here you should select "control Settings". In addition to the menu the keyboard Configuration and Settings of the mouse, you will see a section called "Alternative control" is it you and required. Entering in this menu, set the desired preferences for certain buttons as you are comfortable. Retaining all settings, start a new game.
3
Possible problems. If after you entered the game the steering is inactive, the reason for this can be two reasons: the computer does not recognise the device or you have not installed the appropriate driver (some models rudders provide prior driver installation on a PC). However, all this can be detected under control settings – if the time control settings when attempting to change keys on the steering buttons don't respond, it means that it is inactive. In this case, you need to install on your PC the driver that comes with the device. After installation, repeat the second step.

Advice 4: How to connect the steering wheel and pedals

In connection with rapid development of computer and video game industry, the market began to appear a new device for extended use of the usual computer games. Such innovations set including handlebars and pedals. Today, some games require the presence of the wheel, which was also invented in parallel to its land counterpart. When connecting these innovations can be problems associated with the lack of specific software in the operating system.
How to connect the steering wheel and pedals
You will need
  • Interactive kit the driver of the car.
Instruction
1
When you install this device, you should pay attention to the correct step-by-step connection. As a rule, instruction that included this device helps to fully answer all of the questions associated with the connection. Connect the new device according to the instructions. If you have a disk with drivers, do install them. The connection of this device you can continue fine tuning.
2
In the operating system Windows XP has a utility that can help you in setting up a steering wheel and pedals. Click menu "start" - select "control Panel" - "Game controller". On the screen a new window will appear "Gaming device". This window displays a list of installed play equipment. If you are installing for the first time, tools for games, the list will be empty. To add a new device, click "Add".
3
In the opened window "Add game controller" you will find the list of "Gaming device" and select the type of the connected equipment. Check the box next to "Connect the wheel and pedalsat the bottom of the menu.
4
In the opened window, select the type of your device, if your device wasn't there, click "Other". In the new window, select one of the following options:
- joystick;
- gaming tablet;
- the steering wheel or control arm;
- control racing car.
5
Select the type and specify the number of areas that will be used by your device (2 or 4). Also should specify the number of buttons found on the panel of your device. Among other settings you can use the switch view (top view, cockpit view, rear view). To activate this mode, enable the option "There is a hat switch". The last step in configuring the new device will be entering his name in the "Controller". Then click "OK" to return to the main screen for Game controllers.

Advice 5: How to connect your LPT printer to a usb port

LPT connector used in some models of the printer's, in modern computers, is usually absent, which complicates the process of using the equipment. To use the printer LPT, you'll need to buy a special adapter and configure the software.
How to connect your LPT printer to a usb port
You will need
  • Adapter LPT-USB.
Instruction
1
Purchase the adapter LPT-USB. Buy it can in a computer store or market radios, which sells all sorts of adapters for such devices. One end of the adapter, install the printer cable and secure it. The other end of the wires plug into the USB port of the computer.
2
After connecting wait until the device definition in the system. Most likely, the system does not recognize the installed printer, and therefore you'll need to load the appropriate device drivers.
3
Insert the disc that came in one set with the printer into the disc drive of your computer. Wait for the disk, and then click on the "start menu". Right key click "Computer" and click "Properties". In the left part of the window that appears select "device Manager" and go to "Printers". Right click on the unrecognized hardware and select "Update driver", then select "Automatic search of drivers" and click "Next".
4
If you have no disk for the printer, go to the official website of the manufacturer of your device. Find the section "Service and support" or "Download drivers", then find your printer model and download the appropriate files from the menu of the website. After downloading please install the downloaded installer by running it on the computer.
5
After driver installation, reconnect the printer and reboot the operating system of your computer. Go to "start" - "Devices and printers". If your printer displays in the selected section, the installation was successful and you can proceed to printing.
Note
Some models of motherboards have support for LPT slot, but the connector may not be displayed on the panel of the computer case. To make sure you have the proper port, use the user manual to your motherboard.
Useful advice
You can also purchase the LPT cable in a computer store and install it by opening the computer case and installing the connector into the corresponding motherboard slot. After that you can directly without adapter to connect your printer.
Is the advice useful?
Search