Advice 1: How to connect the steering wheel Defender to the computer

Modern computer games have long gone beyond the plane of the monitors. Thanks to special equipment and devices the player is given the chance to dive into the gaming world. One such device is the wheel of the Defender, guarantees almost real simulation of driving.
How to connect the steering wheel Defender to the computer
You will need
  • - CD with drivers;
  • pedals;
  • - USB cable;
  • - the cable connecting the pedals and the steering wheel;
  • - user's manual.
Instruction
1
Install the wheel on a flat and smooth surface is not too close to the edge. Press lightly on the steering wheel for better attachment of suction cups to the surface. Position on the floor pedal and connect them with a cable included in the package. Not yet installed the required software, do not connect the wheel to the computer.
2
Install the accompanying device drivers on the computer. If a driver disk is attached to the steering wheel when you purchase, use them. Insert the disc in the drive and wait for on screen Windows install the drivers. Run the program setup.exe. Follow the onscreen prompts during installation.
3
If supplied with the device disk driver no, download from the official site www.defender.ru. Open the menu "Gaming device" section "wheels". Select the model of your steering wheel click on it and under the picture click the "Download driver and software". Install the software on your computer.
4
Connect the steering wheel Defender to the computer using cable. On the steering wheel should turn the color of indicator, indicating the device is connected.
5
Check the operation of the steering wheel in the "control Panel" (section "Game controllers"). In the column "Status" should be the inscription "O/S". If not, plug in the wheel again. Click right-click and select "Properties".
6
Next, press the pedal and buttons on the steering wheel several times lock to lock the steering wheel, check the switches. In the Windows Test Axis and Hat Switch should occur the corresponding movement of the cursor on the screen and you should see those buttons that you press.
Note
If after connecting to the computer on the handlebar does not turn on the indicator normal works, it is recommended that you restart the computer. If a reboot doesn't help, try the wheel on another computer. In that case, if the wheel doesn't work not only on your PCs but also on other, contact technical support to resolve this issue.

Advice 2: How to connect your wheel to the game

To connect the wheel to the game, you don't have to have any specific knowledge – the connection is almost instant, you only need to customize the controls in the game any way you like.
Connecting the helm to the game
You will need
  • - computer
  • - steering wheel with pedals
  • the game, supporting the connection of such devices.
Instruction
1
Connecting the helm to the computer. To connect the wheel to the PC, just attach the USB cord to one of the available ports on your computer. After you do this connect to the steering wheel pedal and push the power supply into the socket. Now the wheel is connected to the computer.
2
Game setup for steering. Log in to the game, which supports the steering, and go to the settings menu. Here you should select "control Settings". In addition to the menu the keyboard Configuration and Settings of the mouse, you will see a section called "Alternative control" is it you and required. Entering in this menu, set the desired preferences for certain buttons as you are comfortable. Retaining all settings, start a new game.
3
Possible problems. If after you entered the game the steering is inactive, the reason for this can be two reasons: the computer does not recognise the device or you have not installed the appropriate driver (some models rudders provide prior driver installation on a PC). However, all this can be detected under control settings – if the time control settings when attempting to change keys on the steering buttons don't respond, it means that it is inactive. In this case, you need to install on your PC the driver that comes with the device. After installation, repeat the second step.

Advice 3: How to connect the steering wheel and pedals

In connection with rapid development of computer and video game industry, the market began to appear a new device for extended use of the usual computer games. Such innovations set including handlebars and pedals. Today, some games require the presence of the wheel, which was also invented in parallel to its land counterpart. When connecting these innovations can be problems associated with the lack of specific software in the operating system.
How to connect the steering wheel and pedals
You will need
  • Interactive kit the driver of the car.
Instruction
1
When you install this device, you should pay attention to the correct step-by-step connection. As a rule, instruction that included this device helps to fully answer all of the questions associated with the connection. Connect the new device according to the instructions. If you have a disk with drivers, do install them. The connection of this device you can continue fine tuning.
2
In the operating system Windows XP has a utility that can help you in setting up a steering wheel and pedals. Click menu "start" - select "control Panel" - "Game controller". On the screen a new window will appear "Gaming device". This window displays a list of installed play equipment. If you are installing for the first time, tools for games, the list will be empty. To add a new device, click "Add".
3
In the opened window "Add game controller" you will find the list of "Gaming device" and select the type of the connected equipment. Check the box next to "Connect the wheel and pedalsat the bottom of the menu.
4
In the opened window, select the type of your device, if your device wasn't there, click "Other". In the new window, select one of the following options:
- joystick;
- gaming tablet;
- the steering wheel or control arm;
- control racing car.
5
Select the type and specify the number of areas that will be used by your device (2 or 4). Also should specify the number of buttons found on the panel of your device. Among other settings you can use the switch view (top view, cockpit view, rear view). To activate this mode, enable the option "There is a hat switch". The last step in configuring the new device will be entering his name in the "Controller". Then click "OK" to return to the main screen for Game controllers.

Advice 4: How to install the wheel to the computer

Almost all modern games driving games allow you to use as a control, a game controller, a simulated automobile steering wheel. For most users, its installation is not a difficult task.
How to install the wheel to the computer
Instruction
1
The connection of modern games computer steering wheels is made via a USB interface. Feature USB connectivity you'll be a fully automatic installation of the equipment, and gaming steering wheel is no exception.
2
Install the wheel on the table, securing it with the screw clamp, place the pedals under the Desk comfortable for foot place, and connect the USB cable to one of the respective ports of computer. The operating system will generate an automatic search of device drivers, and will report ready to work.
3
If Windows does not detect the appropriate driver for your racing wheel, go to "device Manager" by right click on the icon "My computer" on the desktop. In the list of installed hardware, find games the wheel and by clicking the right mouse button, select "Update driver software".
4
Following the prompts of the installation Wizard, the equipment will search for the driver on your computer. Typically, a suitable driver can be found on the disk attached to the device. But if such a disk, you can download the required driver on the manufacturer's official website by selecting the model and version of your operating system.
5
After the correct driver is installed and Windows will notify you of the availability of new equipment to work, you can start the game and choose as method of the control wheel.

Advice 5: How to connect Acer laptop to the monitor

Modern mobile computers can easily be used as a multimedia station. The presence of certain ports allows you to connect laptops to TVs, projectors, TFT panels and other similar equipment.
How to connect Acer laptop to the monitor
You will need
  • - cable video transmission;
  • adapter HDMI-DVI.
Instruction
1
If you want to connect the laptop to a computer monitor, start with the definition of suitable ports. In today's mobile computers include the video outputs VGA (D-Sub) and HDMI. Rare that you see a DVI port.
2
Monitors usually have channels VGA and DVI. The new displays supporting Full HD resolution can sometimes have a HDMI port. Purchase a cable that has the correct format and an adapter, if it is necessary. The presence of certain adapter allows you to connect HDMI-Out and DVI-In. It is very important in situations when you want to connect a laptop to a monitor or TV.
3
Turn on your computer and wait for the download of the operating system. Connect the monitor to AC power. Now, connect these two devices together with the selected cable and adapter.
4
Wait until you see the image on the external display. If you use the operating system Windows Seven or Vista on your computer, open the start menu and navigate to control panel.
5
Select "Personalize", and select "Connect to external display". Select the most appropriate mode of synchronous operation of two displays. If you want to use only the screen of the monitor, then highlight the graphic image in the working window and activate the checkbox "Make this main display".
6
In the next field select "Duplicate screen" and just close the lid. Make sure that you have not configured for auto-shutdown when you close the lid.
7
If you want to use both screens, select "Extend this screen". In this case it is better to use the laptop display as the main screen. This prevents image distortion that may occur as a result of the incompatibility of permissions displays.

Advice 6: How to set keyboard Defender

If you have connected a keyboard Defender to your computer, we can say that half the job done. All that remains is to make small adjustments for comfort. If the keyboard is multimedia, the purpose of some buttons may seem uncomfortable. Do not worth it, so as to configure the keyboard much easier than the USB controller in the BIOS E.
How to set keyboard Defender
You will need
  • keyboard Defender, the Defender or keyboard Media Key
Instruction
1
If you need to adjust the cursor blink rate, repeat rate, input character or the delay before repeat – just go to standard settings: start – control Panel – keyboard. In the opened window, in the tab "Speed" will be those items and the result of settings you can check in real time in a special field. To save the settings, click OK. Tab "Equipment" needed to operate the driver information and for technical information. If you are a beginner, modify the parameters in this tab is not recommended.
2
To configure the multimedia keys you'll need special software firm Defender that came with your keyboard. You need to set it when it installed the driver and software. The desktop icon should appear keyboard. Click it, a window opens with the program's interface containing multiple tabs (depending on your keyboard model and version). The first tab Keys (Keys/Buttons) allows you to configure multimedia keys. On your button you can set any action – from launching a mp3 file to your favorite game. If you want to apply settings – press OK (Accept/Save). The other tabs are needed for other settings, for example to display the Caps Lock state in system tray. If you need to change these settings – don't go into other tabs.
ПО Defender
3
If keyboard Defender was not the disk with the program you can free download universal Media Key (or any similar). In the program window in the tab "Buttons", click the "Add" and specify the button or key combination you will use, and then associate them with the launch of the applications you need. In programs such as Media Key, you can customize the media keys, but standard. To save the changes - click on the icon of a floppy disk. To adjust the work program, go to the tab "Settings".
media key
Is the advice useful?
Search