How to open Lak

Just bought the varnish should open with some force. If the cap is unscrewed too easily, it may mean that the bottle was already opened and possibly used lacquer. Bubbles, closed with a decorative cover, you need to carefully release of this jewelry. Gently squeeze the plastic cover with two fingers and lift it up. Do not squeeze too hard – brittle plastic can crack.

If the bottle doesn't open and the cover slip in your hand, wrap it with a towel and try again. Can help and thick rubber gloves. Put them on and turn the lid – it is quite possible it will be.

The bottle too tightly screwed with the thread, place under running hot water for 1-2 minutes. Keep under water was the neck of the bottle. It is not necessary to immerse the bottle in boiling water. Your task is subjected to high temperature "expand" cover. Wipe it dry and then try to Unscrew, put on rubber gloves.

Sometimes the bottle latch to open the varnish, saakshi for the thread. In severe cases, traces of enamel you can find on the top of the bubble. To dissolve dried lacquer, turn the vial, type in the pipette or disposable syringe without needle acetone and gently apply it on the rim of the lid. In a few minutes cotton swab remove razmyagchayuschiesya enamel and pour a new portion of acetone. Take your time – the process will take some time.

Opening the bottle, carefully clean the carving of the neck and the inside of the cover from the remnants of varnish. So the situation is not repeated after each manicure, wipe your neck with a cotton pad dipped in liquid varnish remover.

Gentle measures don't work? Try to apply brute force. Wrap the lid of the bottle of fabric plaster, take the pliers and gently turn. Make sure you twist the cap in the right direction. Don't squeeze her too hard, otherwise the fragile plastic and glass bottle is certainly cracked.