You will need
  • - citric acid;
  • - vinegar;
  • - detergent chlorine;
  • - 50% solution of copper sulfate;
  • - bleach;
  • soda;
  • - ultraviolet lamp;
  • - the steam generator.
Getting rid of mold will help citric acid. Take three tablespoons of the acid and pour them into the tray of powder. Turn on the washing machine in the rinse mode.
A liter of vinegar mixed with the same amount of detergent that contains chlorine. Pour the mixture into the tray of powder and turn on the machine, selecting the highest temperature for washing.
Quite often mold can be seen in the tray of powder. Therefore, it is necessary to clean it using a stiff brush and detergent.
Most often the fungus appears on the cuff — rubber rim around the door. So you need to carefully clean it. For this purpose, suitable means, which contain chlorine. Thoroughly wash the Cup with water, and then turn on the rinse mode.
To help in the fight against mold can 50% solution of copper sulfate. Carefully apply the substance of the rubber parts of the machine and leave overnight. In the morning rinse with soap and water.
Remember that mold loves moisture. So after each wash for 2-4 hours and leave the door of the washing machine and the tray for detergent slightly ajar, so all parts could dry completely.
After each wash wipe dry the cuff — this will help to prevent the formation of mold.
If no methods do not work, then you need to disassemble the machine and carefully handle all items with bleach, baking soda or other cleaning products.
For complete elimination of mold, you can use the UV lamp.
If possible, treat the details of the cars by the steam generator at this high temperature the fungi die. It is desirable that this procedure involved the repair of washing machines.
Sometimes fungi are so much eats into the cuff that bring them out is almost impossible. In this case, it is necessary to change to a new one.