You will need
  • - Gentle cleanser without chlorine or soap solution;
  • - special anti-bacterial cleaning machines;
  • cure scale;
  • - professional cleaning of internal cavities of home appliances.
Instruction
1
Wipe the housing of the washing machine as needed, using a gentle cleanser or just warm solution of soap. Not to spoil the rubber and metal parts of the case, do not use a chemical mixture containing chlorine. After each washing rinse tray for the washing powder; give household appliances should be dry.
2
From time to time wash a washing machine with very hot water to eliminate the appearance of mold in the inner cavities of the machine. It is necessary to set the temperature from 90 degrees, or to choose the mode of boiling (if available in the existing list of programs). Wringing useless, disable and scroll the machine idle and drain the waste water. During such idle progenic machine, it is recommended to do several rinses, especially if you use gel softener. This tool is often not washed out completely during normal washings and becomes the cause of unpleasant odors.
3
Use special industrial cleaners washing machines about once every six months. They can be antibacterial, and designed for cleaning limescale. Be sure to read the information on the package and make sure that the tool is suitable for your household appliances. Next, follow the instructions for use of household chemicals. Usually manufacturers recommend to place a small amount of powder chemicals in the drum, liquid is poured into the same tray for cleaning. After that, the machine moves without underwear; descaling the appliance must always include at least two rinses to the left cavities of the particles of the chemicals.
4
Sometimes the washing machine is needs a professional cleaning. It is best if it is conducted by the specialist. If you are concerned about odors from the washing machine (and the money you did not help), a qualified plumber will understand the cause of this trouble. Typically, when a comprehensive cleaning is rinsing the drain hose, the filter and the inner surface of the walls of the housing and drum.