You will need
- - a pair of shoulder pads;
- - fabric for covering (if necessary);
- - threads;
Ask seller a division woven accessories. To properly pick up the shoulder pads to the concrete along the color, size and thickness. For coats and jackets you will need some products for fine blouses and Raglan sleeves – other, etc.
If you have opted for tailoring transparent or translucent fabric, be sure to pick up the shoulder pads , Nude. You can cover them with a thin knit of linen, or with a piece of old nylon stockings.
Details for linen and silk jackets and blazers often covered the same cloth from which were made clothes. To cut the shoulder pads are recommended on the bias.
Attach the left and right shoulder pads to allowances of shoulder lines of the pins and make sure they are correctly positioned on the clothes. Check the instructions for the pattern. Relative to each other and the lining should lie symmetrically; their edge should align with the edge of the seam allowance.
Attach the shoulder pad to the shoulder seam and make hand stitches, leaving both sides of the part by a couple of centimeters napishite. - Grab the needle with only the upper part, and only on rastojanie 1.5-2 cm from the edge, pierce the body of the pad through. If you do it right, the stitches will not be visible on the "face" of clothing.
Pay attention to the difference between the regular pads and the so-called podocyte, or podocotyle pads. If sleeve products are decorated with ruched crown, these details help well fix the shape of the outfit. Commonly used strips are very thick lining material (their length is about 28 cm and a width of 4)., on which are superimposed folds. The result photodata lining is shortened to 10 -11 cm.
Sew pogoditi to the armhole of the sleeves manually so that one of them fits snugly against the shelf of clothing. The second half of the lining should lay on the back of the dress. The line should lie on the seam allowance of the seam that connects the sleeves with the main product. Thus it is necessary to deviate from machine-stitching a few millimetres.
Faster way to transform the product using the pads – not to hook them up, and glued with adhesive tape or Velcro. Such items can be bought in shops of fabrics and accessories. However, keep in mind that the adhesive pads quickly lose their properties after washings.
For convenience, choose the shoulder pads with a special nadechka, which facilitates proper placement of the part on the shoulder of the product. Align the match marks from the shoulder seam.
Advice 2: How to sew a lining to a jacket
Every thing has to look perfect and for this it is necessary that it is not deformed and is not distorted. It lining not only gives the jacketat perfection while hiding all the seams of the jacket, but also greatly reduces the possibility of changing the shape of the finished product. To correctly sew jacket lining, you need to conduct a number of necessary operations.
Find the details of the lining exactly the pattern of the jacket with an allowance of 1-3cm for seams. All this is necessary in order not to have the feeling of stiffness in the movements. Join the parts of the lining of the jacket.
Sew, right sides inside of the outer cutting edge and the edge of the neck lining with inner side cut piping of the jacket, starting from center back and ending the bottom of the product. All this work needs to be done manually, and then only to stitch.
Remove the product on the front side and insert the sleeve lining into the jacket, do not forget that the lining should be slightly larger than the sleeve of his jacket, as if his arm might feel a stiffness in the movement, and will also cause creases on the sleeves of the finished product.
Align the side seams of the lining and jacket. In order to match and not moved, they must be chop off, then baste the rear side of the allowances of the lining and the base.
Sew a hidden seam allowance for ACC. Zautyuzhte lining so as to form a wrinkle on the fit of the product. Proceed in the same manner and the lower edge of the sleeves. Proutyuzhte with a couple of the finished product.
Now the finished product should be tried. If you feel at ease and confident that everything was done correctly. Remember that adhering to the correct recommendations, you can do it with their hands. Nothing is impossible, it would be only a desire.