Advice 1: How to connect webcam to laptop

To a computer you can connect a variety of devices that allow the user to work in more comfortable conditions. To see the interlocutor on the Internet, uses a special webcam. However, often there are issues connecting this device to the laptop.
How to connect webcam to laptop
You will need
  • - laptop computer;
  • camera;
  • driver.
Instruction
1
To connect a webcamera on a laptop, you need to determine what type it belongs to. There are two types of chambers, namely an external and integrated computer. As a rule, in many laptops the webcam built into the top panel of the cover. To verify this, inspect all the laptop read the instructions that should go in the kit.
2
You can also try to find out information through standard operating system settings. As a rule, all the installed equipment is displayed in a special "device Manager", connected to a personal computer or laptop. Click on shortcut "My computer". Next you will see a window with all the local drives and the connected external portable devices. If the bottom is such an item as a "Video device" or something similar, click on it with the mouse.
3
If it's a webcam, you will see your image on the monitor. A built-in webcam may not work due to the lack of drivers. You can find them on the official website of the manufacturer. If you have an external webcam, the connection will not take more than 10 minutes. Via the USB port connect the camera to the computer. Wait a few moments while the computer will find new hardware. Next go to "My computer" and see if there is a graph "USB video device".
4
Click on it. If the driver was installed automatically, the camera will work. Otherwise, you will need to install special software for this webcam. Usually these devices are sold with an installation disc, so look in the box from a web camera. Insert the disk into the computer drive. Next, locate the. exe file and run it. Wait for installation to finish and restart your computer.

Advice 2 : How to enable the built-in camera on a laptop

Now the growing popularity of visual communication via the Internet through Webcams. There are quite a lot of laptop models with built-in camera. But when you configure this device, some users have problems. In order to enable the built-in camera on the laptop, do the following.
How to enable the built-in camera on a laptop
Instruction
1
Through the menu "start" enter the program used to control the camera. It is usually included in the software any laptop in which inbuilt camera.
If no such program, then use the CD, which is supplied with the laptop.
If this the camera program will work fine, it is configured correctly, and problems with it should not be.
2
Often on the laptop keyboard there is a button with which you can turn on the camera, so carefully consider the keyboard. Usually the assignment of the function keys shows their icon.
If key was not found, check the documentation that came with the laptop. This documentation is on the CD in electronic form. You can also read the information on the website of the manufacturer.
3
Update the camera drivers located on the CD-ROM. If you need a newer version, you can use the manufacturer's website.
4
Maybe the camera is just disabled in the BIOS. Start the system and enter the BIOS, find the settings of the camera (usually the Cam) and change the value from Disabled to Enabled. Now restart the system, the camera should turn on. If after the above actions the camera and managed to include, it is likely the case in the camera itself, it is faulty. In this case, you should contact the service center, it is likely that the camera you just need to be replaced.

Advice 3 : How to enable integrated webcam

Most laptops sold with built-in webcam. To overestimate the usefulness of such solutions is difficult: using the webcamera you can arrange a conference for a few people and be the center of events, geographically being many kilometers away from them. By itself, the laptop – the attribute of the mobile business person. Built-in webcam is another tool that helps make fuller use of the capabilities of a laptop and always be connected.
How to enable integrated webcam
Instruction
In the menu "start" in the installed programs look for files whose name contains the model of your webcam or camera English words and abbreviated cam. If you find such programs succeeded, most likely, they will help you to enable the built-in webcam. Try to run them. Depending on the configuration and design of the laptop near the camera to illuminate the led, indicating that it is enabled and working. When you turn off the webcam led turns off at the same time.
How to enable integrated webcam
If your laptop was not pre-installed software, you install the whole system from scratch, use third party software to enable the built-in webcam. Download and install, for example, a small free utility Broadcaster StudioPRO. In addition to enable the built-in webcam, this program will help you to capture and save to file any streaming video that is playing on the screen or gets into the camera lens, and start my own video broadcast.
How to enable integrated webcam

Advice 4 : How to enable webcam on a laptop

The webcam is nothing like a common, lower resolution camera, built-in bar on the laptop screen or in a special device-holder. Classical resolution web-cameras are 0.3, 1.3, 2.0 and 3.2 megapixels.
How to enable webcam on a laptop
Instruction
1
Web camera allows you to chat to users of computers with special software not only voice and text mode, but also through the "Videophone". With high-speed channels, users will see each other on their computer screens in real time. The most popular program for Videophone, and it is absolutely free called Skype. Sometimes she sends a signal from the camera, voicing the error that the device is disabled. Turn on the webcam in the following manner.
2
Go to "start" or "My computer" and select "control Panel". In the display of the icons in the control panel, select "Small icons" (for Windows Vista / 7). The screen displays various shortcuts to control the computer. Locate the shortcut "device Manager" and start it by double-clicking the left mouse button.
3
You will see the system "device Manager". It displays in a tree format, all installed in a computer device, including circuit boards and peripherals. All devices are grouped by purpose purposes and perform certain functions. Look in the "imaging Devices". This item is usually in the end.
4
If your computer is not connected any cameras or mobile phone in the imaging devices if you double click you will see the web camera icon in the down arrow on the label. Double-click on the icon of a web camera to go into the properties and management of the device. In the home tab, in the "Properties" dialog box, select the "Enable" button. In the pop-up window to confirm the activation of the web camera click "Next" then "OK". After a few seconds the webcam will be turned on.

Advice 5 : How to connect built in webcam on the laptop

Connect the built-in webcamera on laptop just as easy as to connect a simple webcam to a desktop computer. So, plug the webcam on the laptop.
How to connect built in webcam on the laptop
Instruction
1
Remove the installation disc that you had included with the laptop install with this disk is the driver for the webcam. In some cases it can be installed separately, and some – in the overall package the necessary drivers for your model laptop. If you do not have this disk, look for and download driver on the Internet. To do this, type in the address browser to any search engine and enter in the input field, the query containing the phrase: driver download (and specify the full model of your laptop).
2
Open the "start menu" and click on "control Panel" to open the control panel window. Toggle the display of tools in the classic view, locate the line "install the hardware" and click on it double click the left mouse button.
3
Before you the welcome window of the add hardware wizard, click "Next" at the bottom of this window. The system will search new hardware attached to your laptop, and will ask you connected the device to the computer or not. Answer Yes, the device is already connected" and then click "Next".
4
So you see a list of devices (drivers and controllers) available in your laptop. Scroll this list down till the end, the last line is: "add a new device". Select this item and click "Next".
5
The wizard asks you to produce automatic or manual installation of the driver. Since the original driver disk you are not available, but the driver itself is located in one of the directories on the local disk, select manual installation.
6
In the appeared list select "Sound, video and game controllers", then click "Next". Now in the left part of the window click "Standard system devices" and then right – "video capture Devices (non-PnP)" and click on "have disk...". In the subsequent dialog box click on "Browse" and specify the driver location. Then click on "OK" and "Next". After the system completes the driver installation, close the wizard by clicking "Finish".

Advice 6 : How to enable the built-in camera

Built-in web camera is the best solution for making video calls using laptop. Its location on the screen is great for negotiations. Enable integrated camera in the following way.
How to enable the built-in camera
Instruction
1
If the built-in web camera is not equipped with LEDs to signal about her work, the first step is to find out whether she. For this, go to the Windows control panel (via the desktop icon or from start menu) and double-click the System icon. Opens the properties window operating system where you open the tab "Equipment". In this tab click the "device Manager". In the drop-down list of "device Manager", select "imaging Devices" and click on the " + " symbol. Opens a list of all devices, among which find the webcam and make sure it is enabled.
2
To enable the built-in webcam you need to run applications developed specially for it. Usually, this software is pre-installed on the laptop (if it is purchased with the operating system). For example, in order to enable the built-in camera on laptop Acer have to enter the menu "start", click "All programs" from the list of applications, select "Acer Crystal Eye Webcam". With this program you can take photos and record videos, changing the capture resolution and save the results on computer.
3
To enable the built-in webcam is also possible with the help of third-party software such as ManyCam free app that can be downloaded here http://download.manycam.com/. This program supports a wide range of functions for working with built-in webcam.
4
Built-in web camera is automatically included in such application like Skype, Oovoo MailRu Agent and the like. Moreover, if the computer is installed and running in the background Manycam, then other apps will define it as a separate web camera with advanced settings.

Advice 7 : How to turn on web camera on laptop

Today, when communication with eye-to-eye fades into the background and increasingly people are starting to chat "blindly" - in messages via social network or email, the increasingly popular web cameras that allow you to broadcast your actions to any corner of the planet. Of course, anyone who has a laptop and camera, know how to run this USB video device.
How to turn on web camera on laptop
Instruction
1
If the keyboard of your laptop have special Fn key, turn on the camera, hold down on the keyboard this key and holding it in the top row of system buttons press the icon key of the camera. On the screen there is a picture with the caption "On" or "Off" (On or Off, respectively). Get the picture shown On
2
Run portable or built-in camera utility that displays a user interface of a web camera. To do this, find the folder with your camera (the name can be used Camera (Cam) and/or Web) to "start" → "All programs". Run the application and when it displays the notebook interface, enable the web camera in the settings.
3
The default built-in laptop camera is activated automatically when you make someone a video . That is, to turn on the camera, just run the program, which will have access to the webcam (e.g. Skype).
4
Enable USB device on your laptop the settings of the computer. To do this, open "control Panel", go to device Manager. There go to "imaging Devices". In the ensuing section, you will name your camera (sometimes the camera goes under the name "Unknown device"). To enable, click on the name, right-click and select "Enable".
5
If you are using a laptop without built-in and stand-alone web camera, inspect it for the presence of the power button. If it is, press the camera restart itself and deploy on-screen interface of your application.
Note
If the camera is turned on, and instead of the image you see is a black screen, maybe there is a problem with the drivers. Not in a hurry to reinstall them, contact your system administrator or the person who understands computers. If he confirms that the case in your installation, then delete the old driver and download new ones that fit the model of your camera.

Advice 8 : How to turn web camera on laptop

Unfamiliar with computer technologies, users are often interested in how to enable web Cam on laptop. If you purchase a laptop computer has not been configured properly, the built-in camera may refuse to work in different situations.
The webcam on the laptop - a useful addition
Instruction
1
See instruction to your portable device, to know how to turn on camera on laptop. First find out the model of the computer, its name and technical features, including options and opportunities the web camera. If the documentation is not specified the model name of the laptop, please note on the reverse side, where usually there is a corresponding sticker.
2
Click with the right mouse button on the icon "My computer" and select "device Manager". Please note, on the contrary what components is a yellow question mark, denoting a lack of pre-installed system drivers – special services, providing recognition of the device by the computer and doing their work effectively. Click on it and select "Install driver". If the laptop has a boot disk, insert it into the drive and select the option "Automatic search of drivers". Computer to undertake a self-search service and will install them from the supplied disk. In the absence of media, select the option search for drivers on the Internet.
3
Locate the driver for the webcam of the laptop yourself. Try to find the website of the laptop manufacturer or the correct drivers for the device name. Currently, they often are available for download as an installation file that automatically downloads and installs the required services. If you have not achieved the desired result, use the free application DriverScanner available for download on the Internet. After installation, the program will automatically search for missing drivers and install them in order.
4
Browse through the list of currently installed programs in the start menu and find the application that allows you to turn on the webcam on the laptop. Run it and see if the screen image from the camera. If Yes, try to use the camera in different applications, such as Skype, making a video call. Make sure eye webcam above the laptop screen is clean and does not contain a protective sticker, as this often becomes the main reason for the lack of images.
Is the advice useful?
Search