You will need
  • calculator;
  • computer;
  • - the Internet.
Instruction
1
To convert pressure from megapascals to Pascals, multiply the number of Pascals in a million. Ie, use the following formula:CP = ILC * 1000000,where:the ILC – the pressure specified in megapascal (MPa), automatic transmission, pressure in Pascals (PA).
2
If no calculator, then transfer megapascals to Pascals use pen and paper. To do this, write the number of megapascals, and then move the decimal point six digits to the right. Example:1,23456789 -> 1234567,89
3
If the number of megapascals whole (which in practice happens very rarely), then assign this number to the right six zeroes:12 -> 12000000
4
If the right of the decimal point is less than six digits, you must add the missing information (up to six) marks the insignificant zeros:123,456 -> 123,456000 -> 123456000, -> 123456000
5
If, after the transfer of the decimal point in the left part of the number formed of "excess" zeros, just drop them:0,000123456 -> 0000123,456 -> 123,456
6
If there is no calculator, no paper, try to do all of the above calculations are "in the mind". However, it is necessary to be very careful, since the error only on one position means the distortion of the result in ten times!
7
If you have access to the Internet, to transfer megapascals to Pascals or other units of measurement, use the corresponding online service. To do this, type in any search engine query of the type: "translate megaof Pascal" or "Pascal pressure." Then use the on site instructions. For example, open a page http://www.convertworld.com/ru/davlenie/Паскаль.html. On it you will see a row consisting of three Windows. The first of them will need to enter the number of megapascals, and the second select unit of measurement (megapascal), and the third to specify the precision (number of digits after the decimal point) of the result. All versions of convert (without confirmation) immediately appear at the bottom of the web page.