You will need
- - set "NTV-Plus" for connecting;
- - access card;
If you do not have the equipment necessary to connect, please do so or in the company or from authorized distributors. There are different kits depending on your needs. For example, if you already have a satellite dish, order a kit consisting of only the card and the receiver. It is cheaper than the kit with the antenna. A full list of the possible kits and prices can be found on the website of the company "NTV-Plus".
Install the necessary equipment. The coordinates of specialists, who are engaged, and the cost of services in your area can be clarified when you purchase the equipment.
Activate special map "NTV-Plus". It can be attached to your set of equipment, or you can buy it separately, for example, to gain access to additional channels. Set the receiver on one of the channels that are included in the package access on your card. To do this, follow the instructions in the manuals that accompany the equipment. After the infusion you on the TV screen will display "No access" or "Coded channel". Then insert the card into the hole in the receiver, which is called a slot. If the device is not returned the card, then it is installed correctly. Insert the card carefully, avoid damage and bending. This may adversely affect the installation process.
Wait a couple of hours without turning off any TV or receiver, and not switching channels. At this time the initialization and activation of cards. It will be over when on the TV screen, the image will appear.
Card, if the instruction it is not specified otherwise, is valid for six months and gives you the ability to view included in the package of channels. After this deadline, you will need to buy a new one.
Advice 2 : How to activate the card NTV
A standard TV antenna enables us to watch only a limited set of channels, which many people lack. In this case, come to the aid of satellite TV, which allows you to view a huge variety of thematic channels in different languages. The company "NTV-Plus" offers us such services.
You will need
- - TV
- - equipment to connect to "NTV-Plus";
- card access.
Purchase of special equipment necessary for the connection. There are different kits, which depend on user needs. For example, you can purchase a set, consisting of receiver and card, if you have a satellite dish. Detailed information on the types of kits and prices can be obtained directly from a consultant, or on the official website.
Invite a specialist for installation.
Install a satellite dish, if it has not been previously installed. It is usually attached on the balcony outside the window or on the roof of the building.
Activate map "NTV-Plus". It can be purchased either separately or included with the equipment. Following the guidelines specified in the instructions to the hardware, you must configure the receiver to a channel that is part of the access package for your card. After the calibration on the TV screen will display "Coded channel" or "No access". Next, you need to insert the card into the card slot located on the receiver. If the installation is made correctly, the card is not returned by the machine. Card must be inserted carefully avoiding bending and damage.
Do not turn off the receiver and TV and do not switch channels for two hours. This is necessary in order to initialize, activate the map. About the end of it you'll know when you see the image on the screen of your TV.
Usually the card is six months, unless otherwise specified in the instructions. During this period, you have the ability to view the channels included in the selected package. After this period expires you must purchase a new card.