Advice 1: How to sew camouflage

For hunting or airsoft hunter or sniper would be useful camouflage. This garment allows you to almost completely blend in with the surroundings, making you nearly invisible. The stores sold many variations of this dress, but, as often happens, what not. Have to do everything myself so made clothes answered individual requirements.
How to sew camouflage
You will need
  • - Cape or army form 1-2 sizes larger;
  • - fishing net;
  • fabric elastic band;
  • - linen thread;
  • tape and pieces of burlap.
Instruction
1
First of all, decide what you need camouflage: a suit or wraps. If you want a ghillie suit, buy the form of dense tissue 1-2 sizes bigger than yours and sew it to the hood. If you prefer a camouflage Cape, the Cape.
2
Field masking (back, sides, hood, shoulders, outer part of the arms, the back and sides of the feet, and the Cape - the entire outer surface) sewn nylon fishing net with a cell of about 3 cm Chain stitched nylon thread (to avoid chafing) on the perimeter and in the middle in several places. In places masking need to sew the necessary number of rubber bands to mount leaves, twigs, etc.
3
Yarns, ribbons and pieces of burlap about 40 cm long color dyes for natural fabrics in mainly grey, brown, green and mixtures thereof. The color and tone of the suit is selected individually (if autumn is more yellow and brown shades, if the summer - more green, etc.)
4
Weave the thread into the cells sewn network (fold yarn in half, loop the thread under the cell in this loop passes the remaining tail of yarn, after which the noose just tightened). In one cell do not need to weave more than four threads. The netting is held away from the lower part of the camouflage to the top. In one cell it is possible to weave threads of the same color and you can combine strands of different colors. Weaves strands of 1-2 cells, otherwise the camouflage is too thick.
5
Now sew on the camouflage colored pieces or strips of fabric or burlap. In the shoulders, back and rear side (or evenly over the entire surface of the Cape) are sewn large pieces of fabric; on the sides, hood and outside of the hands of the smaller pieces. The front of the jacket and pants are sewn two pieces of fabric (to leave some space when you climb).
Note
Keep the camouflage in the water and do not fall under the rain, it gets wet, it loses volume and becomes very heavy.

Keep away from open fire and use care with lighters, cigarettes, etc., because the suit is made of flammable materials.
Useful advice
Everyone makes camouflage to suit your needs, so feel free to add something of their own, for example, if you expect a lot of crawling - tab on the elbows and knees crisp, sturdy fabric, if you want it for you more comfortable sitting vsheyte in the right places, bands, etc.

Advice 2: How to sew a tent with their hands

The tent does not necessarily buy at the store. Lovers of needlework can make it yourself. Sew up a tent is not particularly difficult. The most important thing then bring it in proper form, to the tent was waterproof and kept the form.
to sew a tent
Instruction
1
Buy rubberized percale or tent canvas. The tent canvas is a linen cloth impregnated and painted green. Measure the desired length and width of the future tent.
2
Make pattern on paper. The tent should consist of floor, roof and four side portions. And one part (front) will represent the input, and therefore requires mounting of lightning.
3
Transfer the pattern to the fabric and cut. Sew all the parts together and vsheyte lightning in one of the side parts. Treat the slices.
4
The weight of the tent depends on the density of the fabric. Floor and rear wall should be made of more durable fabrics, or you can use multiple layers used matter. All panels connect double thick seam or underwear so that the tent does not leak.
5
Horse braid hem, pre-wash it to make it from shrinking. Between the ridge and the braid pave thin hemp rope, the ends tied with loops, attach the stretch. The place of fastening of loops to close with a special patch.
6
At the ends of the ridge to make the holes for the struts, which will attach your tent. Fasten the slotted metal caps or treat the coarse thread. In the rear wall optionally reinforce the hole with a sleeve for ventilation of the tent. At the entrance to make secure the nut, which will protect the tent from ingress of moisture and dirt.
7
The tent should be waterproof. To do this, place the fabric in a 40 percent solution of soap. Give it like you should become. Lower the impregnated cloth in a 20 percent solution of copper sulfate. After the fabric is saturated, remove it from the solution and dry thoroughly.
Is the advice useful?
Search