How to remove a foot from the monitor

Power off the computer and monitor. Unplug the monitor cords. If they are not removable, unplug them from the appropriate connectors of the computer and the extender.

On the table on which you intend to carry out the removal of the monitor stand, place something soft but not prone to electrification.

Pipe monitor flip it over so that the stand was at the top. Let's see how it is attached to his body. This is typically achieved using grooves. To pull the stand from the slots, depending on their configuration slide it forward or backward, or rotate clockwise or counterclockwise. In some cases, tube monitors allow operation as a stand and without it.

LCD monitor turn the rear wall to itself. Make sure that the screen will not collide with any objects, even very soft, because to break it very easily. Even a small crack can bring down the whole indicator. If the screws that secure the stand, not visible, remove the cover small cover. When eversion of the screws do not confuse them with those that secure the rear panel of the monitor.

Removing the monitor stand, be very careful not to drop it. Put it on the table vertically, you can not, not yet install back on the stand. So put it definitely the screen up.

After removing the stand, make the transportation of the monitor, using as a packaging material foam. If the original foam container was not kept, make a new thus, to avoid squeezing the screen, especially LCD monitors. Despite the fact that such packaging well protects the device from impacts, or expose it as such, and especially do not drop it.

Do not try to send the monitor package, as it is in this case likely to be broken. When transporting in the trunk exclude a sharp set of speed and braking except in emergency situations.