To start go to menu of your mobile phone, find "options" or "settings" of the phone. The name depends on the model of the mobile device.
Next, select the "phone" or "basic" and sometimes found the name as "General settings".
Go to this folder, select "phone management", "security" or "protection" that identifies the model of your phone, as described above.
Open this folder and find links such as "phone and sim card" or "pin-code". In order to disable the pincode, select the link to disable the pin, but for this function you need to enter your pincodethat belongs to the sim card. After the introduction of the codeand the phone will complete a transaction and the pincode will no longer be prompted for your mobile device when you switch devices.
To make it more clear how to disable pincode in your mobile device, let us consider 2 specific examples. Take the phone of Nokia with touch screen and phone model Sumsung without such a screen.
So, the Nokia. Go to menu, choose folder options, then a new window opens where you choose the folder "phone", then "phone management", "protection" and eventually go to the folder "phone and sim card". Here you find the request codeand pin" , click on this window select disable and the phone prompts you to enter the pin that belongs to a given sim card. After you have done the operation pin is disabled.
The second option - for example, the phone model is Sumsung. Go into the mobile phone menu, choose folder settings, then security, then "checking pin", click on the box "off", then you will need to enter a pin. Upon completion of this operation it is deactivated.
If you several times enter an incorrect pin code, your sim card will be blocked. In this case, you will have to contact the mobile operator that serves you.
Before you enter the pin, make sure you did not forget, otherwise it may lead to blocking of your sim card
Advice 2 : How to unlock the memory card in the phone
Often to unlock the flash card is not enough of standard means of your phone. Here come to the aid of various utilities, file managers and so on, but most often the lock is released only after formatting.
You will need
- - access to the Internet.
Select tool unlock flash your phone according to the way you've set up a password. Please note that if it was created by a third-party program to obtain without it the access files on the card may not be possible. If the program was previously removed from your phone, redownload it, making sure you use the same version of the application.
If you have set a password to access the flash card of the phone via the standard menu of the mobile device, unlock the removable drive in the same menu of your mobile device. If you do not remember your password, try to choose the most probable combination or contact the service centers in your city.
If the files in your removable drive is installed, remove it by turning the lock switch to the Unlock position. Please note that this type of lock is sometimes possible without your participation, just next time be careful when working with the memory card.
If you did not set any locks on the memory card, but access is restricted, check the anti-virus program, it is best to perform using the computer. If you check the file also does not work, most likely, you will have to format the memory module. In this case, copying may not be available.
Turn on your computer and start the operating system in safe mode, and then plug the removable drive into the USB port. Via the menu "Administration" or "My computer", perform a full format of the card. Please note that this operation may take about half an hour and even more depending on the capacity of the flash card. Then insert it in your mobile device and re-format it from the menu.
Do not block access to the memory card third-party software.
Advice 3 : How to remove a password on the drive?
To install protection on Usb flash can its owner to prevent unauthorized access to data. Sometimes the password appears as an error. If this problem appeared, to remove it without data loss. Solutions to this problem are various, and they can be used depending on the specific case.
You will need
- - flash drive.
Crashing file system on the flash drive can happen due to improper shutdown with the device. So this problem does not appear, use the functionality "safely remove".
Some drives are supplied with a special protection. Look carefully at the drive side you can find a small lever. If you or someone else accidentally moved it, the protection of Usb flash is activated. When connected to the computer there will be a message that is stored on a removable data disk is write-protected. You will not be able to copy the files or record a new one. Slide this lever in the opposite direction, and try again to connect your device to the computer. The flash drive should operate normally.
If this lever is not found - try to rename Usb flash. Insert the flash drive into the USB port. Then click on the icon "My computer" located on your desktop. Click the right mouse button and then removable disk icon, select "Properties". You will see several tabs: "Startup", "General", "Access", "Equipment". Usb flash you can rename the tab "General".
After change the name, remove the flash drive from the computer, not forgetting safe functionality, and paste again. If the error persists, try to restore defaults by clicking the appropriate line in the tab "AutoPlay".
Check for errors by using disk Defragmenter. The data on the data carrier, is not affected. Go to menu "Tools" and click "disk Defragmenter". Tab "Equipment" menu and "Properties" allow you to diagnose a removable disk or optimize it to improve performance.
Usb flash have a variety of appearance, amount of memory, sometimes equipped with additional functions. For example, the SanDisk Ultra USB flash drive - protection function is embedded at the hardware level. Unlock and change this password by clicking right mouse button on the removable disk icon. Browse menu, find the line "password Protection". Leave the pop-up window is empty – the function is disabled. Set the password if device protection is necessary.
To set a password on USB flash using special programs. For example, to protect the USB drive allows you to Secure — the program works automatically. To reset protection, you can only use the program that was used when installing it.
Choosing a flash drive, pay attention to specifications. For example, the memory read speed and write speed, availability protection. Be careful when you first connect the device to the computer.
To format the device with the set password without knowledge of the password does not work, so stick to take you can't.