Advice 1: How to remove the print

When working with documents may have different situations. Sometimes you want to delete mistakenly put the stamp of the enterprise with a letterhead. Easier to print the document again and put the right seal. But if it was not stored in electronic form, to survive is not worth it. Remove the seal from the document in several ways.
How to remove the print
You will need
  • - photocopy;
  • scanner;
  • tablet.
Instruction
1
Print the free from the text location to remove the easiest. Close the blank sheet region, which is the sealand remove the photocopy of the document. If the quality of copies of your imaging equipment leaves much to be desired, it is possible to go the other way.
2
Scan the document as desired, save it as an image. Run the GUI editor. Using the Eraser tool, settings of contrast and brightness give the document to the desired appearance: scratch off printing, remove noise, adjust sharpness, and so on.
3
If print goes the text (or signature), the method of Photocopying can become a bit more sophisticated. Make a copy of the document, closing as in the first step, the region where printing. Start a text editor, type the text that was removed along with the sealof Yu when removing copies from the original. Adjust the position of text on the page so that when output to print , he was in the right place. Put in the printer previously removed photocopy of the document and print it missing text.
4
The same principle can be applied to the scanned document. If the graphical editor has the right font, using the available tools, remove the seal and the text to which this print comes. Create a new layer and type the missing text, selecting style and size of font so that it matches with the style and font size of the original document. Place the text entered in the right place, merge the layers and print the document.
5
If you are unable for any reason to enter the missing text, there is only one to achieve the desired result in a graphical editor. Select the tool "Eraser" or "Brush" and paint color matching the color of the page. Carefully remove the seal, keeping the outline of the text letters. The maximum zoom in for greater accuracy. To achieve the best results possible if to use not a mouse, and connect it to the computer tablet.

Advice 2: How to remove blank page in word

Sometimes users of MS Word have some questions randomly appeared in the body of the document, a blank sheet. A blank sheet can ruin the whole work if it is printed on both sides. It is therefore necessary to remove this sheet before the start of printing.
How to remove blank page in word
You will need
  • Software Microsoft Office Word 2003.
Instruction
1
To determine the causes of blank sheet you want to view all non-printable characters. This can be done by pressing the special button on the Standard toolbar" which is beside the "document map" and "Panel painting". If this panel is not displayed in the window of your editor, click the top menu "View" click "toolbars" and check "Standard".
2
After clicking the button, display the nonprinting characters in your document will appear a lot of dots and other signs. In this view mode, you can find and remove unnecessary gaps and pressing Enter. You need to edit so the entire document, you will see a decrease in all the text on multiple lines. If the text is large, it can be reduced even in a paragraph.
3
Carefully browse through each page as soon as you come across the words "page Break" with a lot of points, feel free to delete this item. Most likely, this item was the reason for the transfer of blank characters to the new page.
4
If for any reason some signs or "page Break you cannot delete, you should do the following: try out all the ability to delete this value. To delete some of the unnecessary characters, you can not only pressing the Delete key, but using Ctrl + X (cut), as well as Backspace and Ctrl + Backspace (delete word).
5
In some cases, all of these methods can remove non-printing characters do not help. Try to edit the document in the "Web document". To do this click the top menu "View" and select "Web document". After you have finished editing the document, don't forget to change the view mode to "page Layout".

Advice 3: How to remove symbols in Word

The functionality of the text editor is determined by the opportunity to get the whole text without having to use other applications to insert graphics, tables, links, symbols. In a Microsoft Office Word document can contain printable and unprintable characters and symbols. To insert and remove them a variety of ways.
How to remove symbols in Word
Instruction
1
Characters in a Microsoft Office Word document inserted in different ways. Part of the symbols ($, &, # and so on) can be entered from the keyboard. To insert other symbols that are not on the keys of the keyboard, you must use the editor functions. Go to the Insert tab, in the section "Symbols" click on the "Ω" with the word "Symbol" in the top right of the screen. In the drop down box click on "Other symbols". In the opened window, select the desired symbol and click Insert. Close the window.
2
To remove the symbols can also be different ways. If you need to remove from a document any character (or sign) in front of the cursor, press BackSpase (key with a long arrow at the top right of the main keyboard area). If you want to delete character after the cursor, press the Delete key (right side of keyboard).
3
In that case, if it is necessary to remove part of the text, highlight the text, hold down the left mouse button or using Ctrl, Shift and arrow keys. Press the Delete key or BackSpase. If you are going to enter other text is erasable, you can immediately start to gain it back – the selection will be deleted automatically when you enter the first character. To delete characters located in different parts of the text, highlight them with your mouse, hold down the Ctrl key, then remove them the usual way.
4
In the document Microsoft Office Word there is an option to hide or display the hidden formatting characters. Paragraph marks in the text appear in the form of the symbol "¶", and space characters - in the form of " • " symbols. They are visible only in the electronic version of the document, but the print does not come out. To remove the hidden formatting characters and paragraph marks, click the Home tab. Under "Paragraph" click on the "¶".
Is the advice useful?
Search