You will need
- - radio
- instruction to the radio
- - a special code
Instruction
1
Find the user manual from the radio. On the first page should be a sticker with numbers a special code that must be entered into the radio to unlock it. If the instruction stickers were not available, it may be in the car. Carefully inspect all possible places.
2
Turn on the radio. Wait until the display will show the word “code”. To enter a five-digit code, repeatedly press the buttons with the same numbers. Ie, if the option 42315, use alternately 4 – 2 – 3 – 1 – 5. When the code is entered, the radio will automatically start to work.
3
To enter the six-digit code, wait until the word “code”. Also, direct dial appropriate digits, enter the correct number. Validate the code by comparing with recorded on the card. If everything is entered correctly, the radio will work.
4
If the code has only four digits, enter it in the following way. Turn on the unit. The display should show the word “cod”. The code is not direct entry. Namely, by using repeated pressing of a button 1 – 2 – 3 – 4. To enter the first digit (it should be 0 or 1), press several times 1. To appear on the display of the rest use 2 – 3 – 4. The range of the last three numbers of the code should vary from 0 to 9. Check the correctness of the entered number. If everything is correct, click on the settings button of the tuner, the radio will work.
5
Enter the code into the radio carefully. After three incorrect attempts, the system locks. Some models of stereos you can just leave alone for a couple of hours. After that they will again be given the opportunity to enter the code. If radio continues to be the lock, leave it enabled, and in this state go about their business. An hour can re-enter the code.
