Here in this situation, experts recommend:
1. To buy LYSOL concentrate or solutions in which it is included.
2. If it is a concentrate that must be diluted 1:100 to 0,3 - 0,4 l of solution.
3. Pour the resulting solution into the sprayer or an empty container from cleaner.
4. To open the car door wide open.
5. To start the engine, run the air conditioner at full power. To direct the flow of air in the cabin in one place, lowering the nozzle below. To prevent the penetration of the solution (theoretically possible) on the glass or sitting, it is necessary to take precautions.
6. You can leave the car and spray into the holes for air intake at the windshield. It is important not to pour, and it sprayed! To eliminate negative consequences and to protect their moral condition, it is necessary to test the impact of the solution on a hidden area of your car.
7. To kill the engine. A few minutes of waiting.
8. Again to start the engine (without the air conditioning and fan). Open the passenger door and turn on the internal air circulation (stop the flow of air from the outside). All glass should be omitted. Sprinkle liberally at the feet of the passenger under the glove box, because there is a fence of air in circulation mode. The air entering the evaporator passes into the system.
It would be good to get to the evaporator, it is well sprinkle. Turn the motor off. In the case when an unpleasant odor continues to disturb, duplicate the procedure a day later.
