Advice 1: How to sew without a pattern summer pants

To carry outfit with your own hands – not with the incomparable pleasure. However, not every seamstress have the skills to build patterns. Meanwhile, to quickly sew women's pants, does not necessarily possess all the secrets of tailoring. Enough to master basic stitches on the sewing machine, and sewing at all possible to do without a pattern.
How to sew without a pattern summer pants

How to sew harem pants without a pattern



To sew the trousers of complex cut, not build an individual pattern, it is impossible. However, to make a simple trousers with rubber band in one night is quite real. Fortunately, in recent times, these wide pants in Vogue, and in combination with a fitted top they will look great on you. Trousers hide too full of feet, give the image a special charm. In addition, such clothing may need to practice Oriental dances.

The basis of future products will serve as a square piece of suitable fabric. The painting in the summer must be well-draped, light: viscose silk ", kashiba", satin. If you prepare a dance costume or outfit in Oriental style, which is going to be worn with a skirt, it is permissible to use a chiffon.

Fold the square fabric on the diagonal line in half to make a scarf. The top corner of the woven pieces will be the waistline, the lower two opposite slits for the legs. Trim and fold the hem of the belt, form a drawstring and prostrochite it on a typewriter. Baste lines joints and make the engine line. You have to put elastic webbing in drawstring, remove the basting and steam the finished product.
Eastern touch of summer pants will attach elastic cuffs. Drawstring to tuck the Trouser legs from the bottom about 4 cm and prostrochite and pass the elastic tape at the ankle coverage. Open space manually sew a hidden seam.


Favorite pajamas instead of patterns



Simple summer pants from elegant lightweight fabric can be made on the basis of the pajama pants with the right cut. Laid out neatly on the horizontal surface of a large segment of the working fabric, the reverse side of the top, securing it at the corners with sewing pins so the fabric will not slip. Place on top of pajama pants, and then very carefully draw a sharp remnant of the rear side of the product.
Translating the contours of pajama pants directly on the canvas, it is better to not use the tailoring chalk, and pointed remnant. You can not be afraid to make mistakes, taking extra lines on the fabric – all traces will be gone with the first wash.


Such manipulation repeat with the other piece of the cut – set contours of the front of the pants. Please note that the rear part of the pants will be slightly larger than the front. Cut out two main parts of the product, and set the sewing machine all joints. Sewn sections by hand or on the sewing machine, consistently treat the upper and lower hems.

You will need to insert the elastic at the drawstring, and a summer outfit is ready. It can be worn at home and for everyday walks. The garment is perfect for sports activities.

Advice 2: How to sew breeches

If you suddenly realized that the old jeans no longer fit your size or if you wanted to update your wardrobe for the summer, do not have to go to the store for new things – you can alter old jeans, turning them into elegant breeches. Cropped trousers look stylish and neat, great for summer walks and for the working office environment.
How to sew breeches
Instruction
1
Take the jeans that you want to modify, and with the help of a seam Ripper or manicure scissors strut seam that goes along the bottom edge of the pant leg. Outwrite the lower edge, so that it was flat and not bent.
2
A jeans sew flared so they looked sleeker in the figure. If your jeans are flared, turn them inside out strut side seams and make the legs straight, having small straight lines from the beginning of llesenia to the bottom edge. Line must be perpendicular to the bottom edge and make with it an angle of 90 degrees. Cut off the excess, leaving a seam and stitch jeans on new lines the side seams.
3
Again remove the jeans on the front side and swipe smooth fine lines for bending the lower edge at a distance of 2.5 cm from the edge. Then draw a line, on which will be folded lapel legs at a distance of 5 cm from the previous line.
4
Bend each leg at the planned lines and try on jeans if the breeches seem too long, cut them even more, cutting off the bottom edge, and then mark a new line of ACC. After you achieve suitable length breeches, sewn the lower section, fold it inside out and cut the pins.
5
Prostrochite the lower section of each leg twice at a distance of 5-7 mm from the fold, and then directly on the line of bending of the lower edge. Unscrew the wide end of the leg up the line of the lapel. Prostrochite slips to the stepper seams double reverse stitching.

Advice 3: How to sew a scarf

Klondike solitaire is a Russian national headdress, has long enjoyed great popularity among women. In our days remember him not many. But playing with colors and ways of tying scarves, you can create very interesting images. You can experiment as you like, after all to sew myself a scarf is not difficult.
How to sew a scarf
Instruction
1
Choose high-quality material your favorite colors. For starters, you can use ordinary cotton or flannelette fabric. It is very pliable.
2
Prepare the working place and the tools – tailor's meter, pencil, scissors, thread, needle. Will also need a sewing machine.
3
Before to sew myself a scarf, measure the circumference of your head.
4
Now, given the taken measurements, make pattern. For example, if the circumference of your head is 55 centimeters, you need to cut from a fabric of three parts – two rectangle with a length of 19 cm and a width of 8 cm and a semicircle with a rectangular base. In the last element sizes should be as follows: base length – 47 cm, base width 16 cm, height of detail 34,5 cm
5
Now treat all the contours of the overcasting stitch. Stitch between the two rectangles from the inside along the long sides. Then turn on the front side, fold the unsewn edge of the narrow inward to a depth of 1 cm and iron well.
6
Make two lines along each long side, previously having receded 1 cm. It will be compartments for rubber bands. Neotrazimaya 1 cm to the brim.
7
Take two elastics for long, 6.5 cm and insert it into compartments. Capturing first with one edge, pristrochite them. Then pull to the other side using safety pins and make a line. You should have a little gathered detail.
8
Will astrocyte basic detail on all edges by pre-bend inner side. Can use the curly line.
9
Edges of the narrow base of the gusset insert to the gathered detail and baste, then stitch.
10
The result will be a very interesting and original scarf which can be worn on a hike or a walk in nature. It looks especially well on children. If you wish, you will be able to sew a scarf different shape, more elegant and interesting.

Advice 4: How to sew a skirt for dancing

Probably not such girls who have mastered the art of Oriental dance, which had not dreamed about your own unique costume. This dream is achievable, if you gain a little patience to sew a skirt for the East dance with their hands.
How to sew a skirt for dancing
You will need
  • - paper patterns;
  • centimeter;
  • - the range;
  • pencil;
  • - scissors;
  • - Mel;
  • - lightning;
  • - iron
  • cloth;
  • - threads;
  • - sewing machine;
  • - crinoline;
  • - beads;
  • stones;
  • - sequins.
Instruction
1
Decide which style of skirt to choose from: in a lot of it depends on the figure of the dancer and her taste. Traditionally sew a skirt "the bell".
2
Build a pattern. Knowing your size, this is not difficult. For example, if you wear clothes size 44, on a sheet of paper draw a straight angle and sides set aside 22.9 cm (1/2 semicircle waist to measure plus 3 inches for all sizes). Then connect delayed on the sides of the point angle in a semicircle. Then on the sides of the angle from the already pending points of intersection measure still 125,9 cm and draw a semicircle. Create a belt pattern: draw a rectangle whose length is 75 cm plus 3 cm increase on the clasp and the width is 6 inches. Cut out the pattern.
3
Lay the cut out patterns on the fabric face down and draw around them with chalk, giving the parties an additional allowance of 1.5 cm for seams. Cut the cut parts of the skirt.
4
Sew the side sections of the cloth, leaving on one side by 20 inches not zastrocheny stitch (for zipper). Ratatouille allowances of seams and vsheyte zip.
5
Detail for belt fold in half and astrocyte. Sew the waistband to the skirt fabric.
6
Cut crinoline strictly on the contour belt, attach it to the fabric, the element which pre-cut and sewn these two pieces with seam 1 cm Proutyuzhte that the zone of leveled off, and then prostrochite all the seams. Sew the belt on top of the skirt.
7
Adorn the belt with beads, stones and sequins.
Note
Make sure the construction of the pattern! Error in the drawing can lead to the fact that the skirt does not work like intended.
Useful advice
Since these skirts use hidden zipper, the order of sewing is somewhat different from sewing a regular zipper: you should first precocity lace zipper zippers to the side sections of the skirt, and then sew the remaining side seam.

Advice 5: How to sew wide leg pants

Even if you do not feel the lack of clothes in her closet, sometimes there is the desire to make something with your hands, because such a thing brings a lot of fun.
How to sew wide leg pants
You will need
  • Thread, cotton fabric, elastic band, sewing machine, the tape.
Instruction
1
In order to make wide pants, even will not have to do the pattern. Take the fabric and cut out two rectangle with a length of 100-110 cm and a width of 75-110 cm. Sizes can change depending what is the width of the legs you want.
2
Put the two rectangles of fabric together and fold in half vertically. Next, mark the bend line up approximately 70 centimeters in both sides of ten centimeters. Combine the smooth line of these notes and make them cut.
3
Sew the edges of the cut together. Then sew the opposite side of the rectangles of fabric. If you did everything correctly, you should get two kind of pipes that are connected on the neckline.
4
Make the folds at the bottom of the trousers and on the belt, sew. Insert at the waist and bottom of leg elastics.
5
Sew similarly wide trousers-Afghani. You will need a piece of cotton fabric size 80*200 cm, elastic band with a length of 2.5 meters and thread in the color of your fabric. On the edge of the fabric treated with a zigzag on the sewing machine or serger.
6
Next, mark the edges of the fabric on both sides cuts at 60 inches. Fold the cloth diagonally and fold the edges towards the short side, and secure with pins. Then baste and prostrochite on a typewriter.
7
Take two strips with a length of 64 inches (plus 2 cm allowance at the side seams) or one 122 cm wide and 24 cm for the manufacture of the belt. Seams sew and fold it with the top edge of the pants to each other, right sides. Fold the waistband in half, pristrochite to the main product, turning the seam allowance inwards.
8
On the belt, make two lines that they have divided the width into three equal segments. Take the waistband of the length which corresponds to the volume of your waist, insert the three bands between made lines.
9
The hem half an inch tuck and insert the elastic. Its length corresponds to the size of your ankle. You are ready with the trendy wide pants-Afghani.

Advice 6: How to sew sweatpants

Sports pants need for sports, Jogging or outdoor activities. They can be made yourself if you possess the elementary skills of cutting and sewing. To simplify the work and make the pants comfortable, you can not sew in the pockets, not to decorate them with stripes and other elements.
How to sew sweatpants
You will need
  • cloth;
  • - sewing supplies.
Instruction
1
Choose soft and stretch fabric – best fit cotton knit that stretches, but not stretched and retains its shape. Prepare the lace, which will slide in the drawstring at the waistband, scissors, thread.
2
Prepare the pattern of the leg – will watertite it yourself, schematically, taking into account all the dimensions and do not forget to do the seam. You will need a waist measurement, hip measurement, the distance from waist to crotch, two lengths (side – from the waist to the ankles, and the internal from the crotch to the ankle).
3
Build the pattern on a large sheet of paper in full size. The side of the sport pants will be in one piece, without seams.
4
The second option is cutting – make pattern for other pants that you wear or wore. Just add a few inches for the handle the bottom and on the cap zone.
5
Sweeps the details of the pants. Attach the legs face each other and treat the seams. Try on the pants, checking how closely they match your figure.
6
Sew pants. Prostrochite seams basted, remove the auxiliary thread, treat the seams with a serger. Finishing seams is necessary, as the knitwear can "crawl" in the process of socks.
7
Treat the lower part of the pants. First prostrochite the edge, treating them with the serger, then fold and stitch a normal seam.
8
Make a belt. Finish the edges with overlock. Then sew detail for the formation of the drawstring strip of the same fabric, but smaller. Prostrochite the stripe on the sides, leaving space for threading the drawstring. Or just fold the belt and prostrochite two decorative lines. Treat holes for the lace.
9
Prepare the lace. As pants sports, it is assumed that you will perform a variety of movement, so the belt must also be flexible and have a good stretch. You can wear it instead of lace the bodice. Or make yourself stretch lace, lousy in it, a rubber strip in the middle.
10
Thread the drawstring-drawstring tie at the ends of the knots. Sports pants ready.
Search
Is the advice useful?