Advice 1: How to break the old log house

As quickly as possible to begin construction of new housing or just to see the land on which is located the old to be demolished, detached house, must be dismantled. If the material obtained in the process of dismantling, reusing, this must be done carefully, taking care not to damage it.

How to break the old log house
The demolition of a building is a serious engineering problem with a lot of nuances and subtleties, from the location of adjacent buildings and ending weather conditions. All of this should be considered and taken into account at the stage of preparation, during which the log house to be demolished, was surrounded by a fence in accordance with the boundaries of the site and is disconnected from all its communication systems: electricity, gas, telephone and broadcasting networks, heat. Only after the object is isolated from all systems, you can begin the process of dismantling the house.

Dismantling log homes

To destroy the house you need to start with the roof. If you plan to keep the roofing material, remove it carefully. So, the slate must first pry off with a crowbar "crowbar", under which is necessarily placed a small Board, then pull the nail. Dismantling roofing shingles starts from the ridge and corners, gradually removing the rest of the. If you plan to save and rafters, they need to be numbered and for ease of Assembly at the new location need to pre-sketch with numbered elements. Wooden crate is knocked in the direction opposite to the fastening nails.

After the roof system will be dismantled, disassembled the overlap between the attic and the rooms and then the walls. Ceiling boards also, do not throw out, they can later be used for the manufacture of formwork or scaffolding.

The dismantling of the walls, start with accessories. Good logs can then be used for new home construction or bath, for this they numbered at both ends, and then put the site in a neat stack. If a log has rotted in the middle, it is cropped in half: the rotten part is you can throw it or use it for firewood, and good to leave for construction, for example, a barn or farm building.

From window and door openings removable doors and frames. If there are openings in the boxes, they are sawed, then through the puller is pulled from the openings.

Building materials such as moss, roofing, sawdust, roofing material, fiber glass and others are disposed of in the trash, so as to reuse the they.

If the site of the old house to build a new Foundation can not be dismantled, as the basis of the new structure can be built right on it. Under the Foundation of the old house the land is already compressed, and therefore it is better not to disturb. If the site is cleared completely, the Foundation, as with all the structure is dismantled.

The demolition of the log house: the final stage

After the house is broken, you will need to call the representatives of BTI. They will lock in place, that old house was broken, and then make the appropriate act.

You will also need to apply to the Registrar for registration of termination of rights of ownership of the demolished house. If you do not receive these documents in advance, in the future, when the decision to build a new house on this site, you may experience problems with collecting permits for the construction and design of the property.

Advice 2: How to break the wall

In our time, low maintenance costs without redevelopment areas, which in most cases involves the demolition of the partitions. They say that to break – not to build but to break in the apartment the wall not be amiss to find out how to do it properly.
How to break the wall
First, make sure that the wall you intend to break, not a carrier. To do this, check the layout of the apartment, issued by BTI. Typically, the walls of which are allowed to break are not thicker than the laying of one brick.
If you are doing repairs in an apartment, be sure to move furniture to other rooms and to cover all possible plastic film dust will be a lot. If the wall passes electric wiring, unplug the electrical panel by turning off the corresponding machine in the electrical panel.
Armed with a reliable drill with a nozzle-lance, start to destroy the plaster, exposing the seams of a laying. When the walls try to go into the joints between the bricks. Gradually serves one brick, then another, and so the whole wall a little bit would be a pile of rubble. Don't forget to carefully disconnect the electrical leads, and insulate the contacts.
Please be lined with garbage bags and stacking them in the brick rubble, take out what is left of the walls of the apartment.

Advice 3: How to paint an old house

If you do not live in the village permanently, and be home in the summer, it hardly makes sense to sheathe the dwelling siding. Paint old house — so save money, and do the easy jobs yourself.
How to paint an old house
You will need
  • • paint;
  • • spatula;
  • • brushes (wide and narrow);
  • • coarse sandpaper;
  • • construction tape;
  • • brush of metal wires.
Determine the scope of upcoming repairs to calculate the amount of paint. To do this, measure the painted area. It will be equal to the area of the walls from the roof to the Foundation, minus the area of Windows and doors.
Buy paint in a store or on the basis of the building. For exterior painting of walls, you can use alkyd enamel, oil paint, acrylic and alkyd water impregnation. You should choose between alkyd enamel and oil paints, since the aqueous impregnation are better suited for walls, sheathed the new tree. The amount of paint determine by multiplying the value of average consumption (indicated on the Bank) to the area of the painted surface. The resulting number is double because the quality coverage you need to apply at least two coats of paint.
Prepare the walls for painting. Check and if necessary adjust the elements of the old skin, worn out. Using a metal brush clean the surface of the old paint. Remove from the walls of the cleaned husks. Architraves, window frames, doorways sand paper. To prevent the ingress of paint, using masking tape, close the glass wrapping paper or old Newspapers.
Before operation the paint mix thoroughly. Apply it with a wide brush from the top down. To do this you need to drips of paint could be rubbed, avoiding drips. For the first coat use a liquid paint to make it filled in small cracks and pores. After two or three days cover the walls with a second layer of paint.
Tidy up the window frames, cornices, panelco doors. Paint them with narrow hair brush. On cleansed from dirt, the surface apply the paint lighter tones or contrast. When finished, remove the tape and paper off the Windows.
When choosing paint, keep in mind the service life of coatings: oil paint — not more than three years, for alkyd enamel — no more than six years. If the price of alkyd enamel is higher than oil paint, it is still more economical to use alkyd enamel.
Is the advice useful?