You will need
- The receiver is equipped with an RF modulator. Two TVs. Low-frequency cable type "Tulip". Cable capable of maintaining signal in UHF (coaxial wire).
Connect the first TV with the receiver via a low frequency cable type "Tulip" using the same connectors.
Connect the second TV via coaxial cable with the input RF modulator.
To mitigate these shortcomings by increasing the number of channels on the second TV. To do this, enter the menu of the receiver and select the channel "UHF", for which there is no broadcasting channel. Put it on a second TV adder antennas. One input connect the conventional antenna and the other RF output of the receiver through a coaxial wire. Configure the channels on the second TV while the receiver, which, after saving the settings in the menu, appears the additional channel. The image quality is satisfactory.
Unfortunately, this type of connection has the following disadvantages: Both TVs will show same channel. May reduce image quality on the second TV.