How to get rid of scratches on furniture

To get rid of scratches on furniture from MDF or chipboard furniture use a soft wax. It is designed for repairing cracks, scratches, chips and dents to hardwood and laminate surfaces. Wax can be purchased at specialty hardware stores. Pick the desired color.

Apply the repair composition method of rubbing on the damaged surface. If you have formed a stone chip on the furniture or deep scratch, take the knife, cut a small piece of the wax and fill in the chip. The excess gently remove with a plastic spatula, and after that buff the damage of a dry felt cloth.

Several companies produce special polishes designed to Polish wooden furniture and mask scratches and blemishes. Varnish are available in different shades, among which there is a suitable tree for any breed and color. Pick the closest color to the wood of your furniture. As rubbing the varnish into the surface scratches and worn areas of the polishing will become the color of the rest of the surface.

You can buy a special tool to fill in scratches on furniture - bar furniture. Shake the furniture a touch before application, put in 1-4 layers, depending on the severity of the damage to the surface. Leave to dry for 5-10 minutes and remove excess with a clean damp cloth.

Small scratches on the furniture made light wood, you can hide, wiping the scratched place the pulp of a walnut or Brazil nut. The nut is pre-cut and wait for 1-2 minutes to drain peanut butter.

In order to match the repaired surface color, also often use vegetable or Tung oil. This method works especially well on wood furniture, light pine and similar wood naturally darken under direct sunlight.

Apply oil, let it soak into the wood and, if necessary, if the surface is still not dark enough, repeat the procedure. After applying three layers, before applying the subsequent, leave the furniture to stand the night so that the oil penetrated deeper into the wood.

Minor scratches and chips can be overcome by means of steam. Apply a damp cheesecloth, folded in 3-4 layers, to place the chip and press it with a hot iron. Catching steam penetrates into the wood and expands on it, hiding the damage. Infinitely, the tree will not expand, so the big chips to get rid of the defect will not work. And the most important: first make sure to try this method on some inconspicuous part of the furniture.