You will need
  • - Special cleaner;
  • - wipes;
  • - cleaning powder;
  • detergent;
  • - vegetable oil;
  • - nourishing cream.
Instruction
1
To remove the mounting foam is not difficult, if it has not yet had time to harden. Buy in household shop a special solvent — usually it comes in the form of an aerosol. Also on the counter you can meet wipes-cleaners. Carefully study the composition. Some tools are too aggressive, so they are not recommended for cleansing the skin. Wipe the foam with a rag as possible. Then soak a cotton pad in the remedy and wipe thoroughly with hands. Try not to miss any contaminated site. A special solvent can be replaced with acetone, gasoline or liquid varnish remover.
2
Cured foam can only be removed mechanically or will have to wait a few days, when she will disappear. Preheat vegetable or any other oil. Check the temperature with the back of your wrist — it should be tolerable to get burnt. Then evenly coat the hands. Apply a little cleaning or washing powder, and actively RUB the skin. Can use a stiff brush to the back of a foam sponge or pumice.
3
Pour into the container of hot water and add any detergent. Stir and dip your hands in soapy water. Leave on for 15-20 minutes. Then lather hands and intensively RUB your skin with a loofah. Repeat the procedure until the complete removal of foam.
4
After the hands are completely cleaned, apply any nourishing cream or plain vegetable oil. Remember that polyurethane means affect not a skin condition. May experience irritation or an allergic reaction.