You will need
  • - Solvent;
  • - a cotton swab;
  • - the bandage;
  • - toilet paper or newspaper;
  • - iron
  • Board;
  • hydrogen peroxide;
  • - washing powder;
  • - stain;
  • - sealant cleaner;
  • - paint for clothes;
  • - washing machine
  • - fridge
  • blade;
  • - cleanser foam;
  • - scraper or cardboard;
  • - vegetable oil;
  • water;
  • - rubber gloves.
Take the solvent and with the help of a cotton pad apply generously to the stain of sealant, on top of iron with a hot iron (temperature must match the type of fabric) through two layers of toilet paper or newspaper. Repeat until the disappearance of pollution.
Buy in the drugstore hydrogen peroxide in a concentration of 98%. Apply it on a bandage and then on the damaged item, wait until the composition will not cease to foam, and then rinse and wash as usual. After drying, no trace remains.
Visit home improvement stores, purchase a special cleaner and sealant, apply to a cloth and then wash the thing normally. The color material of the spot may change, then once dry it can be colored with paint to wear or to give to the dry cleaners, where it will restore the color.
Stretch fabric with a stain on a solid Board or other flat surface and place in the freezer and leave for two to three hours. Remove and cut with a razor blade. Your movements should be precise, sharp, but accurate, otherwise it will damage the material.
Use the stripper to foam. Gently apply it evenly on the fabric with the stain and wait a thin film that can be removed with a blade or nail, then wash as usual. This method is suitable for cleansing light things, since it leaves no traces after the procedure.
Try to remove the sealant immediately after getting on the thing without waiting for drying. You can with a scraper or cardboard to remove the composition and then use stain remover and wash. Apply stain in accordance with manufacturer's instructions.
Take any vegetable oil, pour it on a cotton swab and wipe the stain. The oil should dissolve the sealant. Then wash the thing in hot water and dry. Traces should not stay.