You will need
- - dense fabric;
- - belt strip;
- - clothesline;
- - foam;
- - thick cardboard;
- - cotton fabric;
- - 2 large flat buttons;
- - REP tape;
- - elastic webbing;
- - 8 plastic or metal ring;
- - sewing supplies.
Make pattern kangaroo. The front part of the backpack resembles panties. Take a square with sides of 45 cm In the lower part with both sides, draw lines for holes for the legs. Height — 18 cm, width at the bottom of 10 cm.
Pattern the rear of the kangaroo is a trapezoid. The lower side of which is 30 cm, top 8 cm and a height of 60 cm at the Bottom part, draw 4 tuck width of 4 cm, a height of 5-6 cm. Position them equal distance from each other.
Similar parts will have plenty of foam and cotton fabric. Cardboard make a detail for the back.
On the back of the backpack will astrocyte tuck. The joints were strong, lay in 2 lines. Fold the front and back right sides to each other, aligning the bottom sections and sew them. Similarly schaute parts from foam and cotton fabric.
Store details in the following sequence: the lining of cotton fabric wrong side up, then the foam, the cardboard element for fixing the backrest and base part of the dense fabric. Combine all the slices, once cut and finish the edges reps ribbon, folded in half.
The upper cut panties bend on the wrong side of 4-5 cm and prostrochite kulisku. Make 2 lines. One close to the outlet, the second at a distance of 2.5 cm from the top edge. Insert in the resulting 2 cut drawstring elastic tape.
To the lower part of the back kangaroo sew a belt with a length of 0.5 m. Attach 2 rings on each side. To the top of the backpack, sew 2 straps length of 0.5 m and attach to the underside of each of them for 2 rings. At a distance of 5 cm from the edge of the handle loop for the clasp.
Cut 2 pieces of belt strip with a length of 1.4 m each. Thread them through the rings on the straps of the backpack and lock. To the top of the front sew 2 flat buttons. Backpack kangaroo is ready.
You can make a backpack and soft. For this element of Board is not vsuite in the basic design, and sew to the back pocket and insert cardboard for fixing the backrest of the child as necessary.
When wearing the baby on her back crossed straps in front and pass them through rings on the belt and tie a knot. If you want to carry your baby in front, on the contrary, crossed straps on back, fix them through the rings on the belt and tie in back.