You will need
  • To connect the wires in the socket you will need: screwdriver (simple or cross), pliers.
Built-in sockets designed for hidden wiring when the wires hidden inside the walls and electrical outlets are also recessed into the wall. In the apartments almost always installed wall sockets. Hidden installing an electrical outlet in a purpose made plastic boxes,which are called enclosures. Wires are attached to the connectors or screws, or clamps. The option to install electrical outlets in the wall every year more and more popular, despite the fact that this setup requires a lot of money and effort, takes a lot of time.
Overhead outlet is most often used when an open transaction, that is, when the wires are laid on top of the walls. They are often put in wooden holiday houses, fixing directly onto the wall.
Sockets come in different types: with protective covers (for nurseries); external works (installed on the street, the wall of the house); socket with timer (can set switch-on time); to ground. The first thing to do if you want to connect the wires to the socket is disconnect all your house or apartment!To do this, disconnect the supply of current to the plate! To connect socket: remove it from the protective case; to find a contact group (2 contacts connect to wire); loosen the bolts that squeeze the wire, rotating them counterclockwise to such an extent so that the cable slipped in the clamp. Strip the wire ends approximately 1 cm. Now gently push the first wire into the clamp and tighten the bolt. Also will do with the second wire.Slip into the socket protective enclosure, screw it. Turn on the power of the house on the flap. Will the outlet for example some Desk lamp if it is lit, then you have done everything correctly.
If you want to install the socket with grounding, as required for example for electric heaters, you should also wire-supplying electrodes (zero and phase), connect the ground wire. These sockets just have 3 contacts. The third contact is easily distinguished from the others, so it connects to the metal brackets located on the sides inside the socket.Grounding is easy to do in a separate house, drive in the ground (under the floor or on the street) area of metal about a meter long and attach the wire. In apartment buildings there is a ground in General electric flaps, ask the expert where it is and how to connect to it.