How to make a socket from the switch

Determine the location of the sockets for the rules this is from one meter to one and a half from the floor, according to European standards – a little above the floor, namely, from thirty to forty centimeters. But if the house has small children, need not just to place the outlet higher, but to ensure its damper.

Make sure that the outlet was at a distance of not less than two feet from any pipeline, including not only gas, but also water pipes.

All connection sockets spend at the disconnected electricity, preferably on the flap to put a warning "don't include".

The wiring lead of 30 centimeters above the floor is the best option both open and hidden wiring.

Before connecting wires pre-strip to ensure the best contact.

When you connect provide a strong and reliable screw wiring to avoid heating or sparking.

Fasten the socket on a wooden or plastic stand not less than 10 mm wide (this only applies to open wiring.

To secure the socket on the escutcheon, use two screws or connect them together with a special clamp.

When connected sockets, consider the power alleged to include appliances. If the plug device has a ground wire, the socket must be accordingly.

Remember that with the parallel connection of the sockets from the switch the light will turn on whenever you connect the device in the socket, and when a serial socket will only work after turning on the light.

Put the frame and install the panel mechanism.

The choice of whether to hold the socket from the switchis strictly for you - that you will use the result of their work, but still better to leave such employment, as an installation electrician.