You will need
- - telephone outlet;
- - screwdriver;
- - telephone cable;
- - cable box;
- - screws;
- - screwdriver.
The installation of additional phone sockets in some cases can be avoided. For this you will need to acquire for your phone cord is of such length that it is enough to connect it to the existing outlet. To connect devices with non-removable cord, you can use a phone extension cable.
If you do decide to install an additional outlet, it is necessary first of all to acquire. They are of two types: miniature RJ-11 and large RTSC-4. Let's see which fork has your phone and choose the appropriate outlet. At the same time get a phone cable and cabletion box of the desired length and screws.
Take the cabletion box and secure it with screws on the way from the existing telephone socket to the installation of the new. Swipe inside the box cable, and then close it.
Screw the new socket to the wall. Connect it to the cable in the following way. If it's socket type RJ-11, the conductors of the cable connect to the two middle contacts, and two extreme Express free. If is set the socket type RTSC-4, open the plug your phone and see how the contacts are connected the wires. To the same contacts of the plug and the conductors of the cable in the socket. For reference: standard outlet RTSC-4 wires is commonly connected to two right contacts, but this requirement is not always observed. Close the plug and socket.
Pull the old outlet. Lift the handset of any parallel phone in the apartment below in the line was not able to do the ringtone, capable of causing electrical shock. Connect the new cable in parallel with the old. Close the socket and place the handset on the parallel phone.
Connect the phone to the old outlet. Make sure it is earned. Also make sure that the other parallel devices are not lost efficiency.