You will need
- Personal computer BIOS
Instruction
1
All settings will be made in the underlying system I / o, so the first thing to go into the BIOS. It allows you to prepare your computer to all software have been able to start at startup, and to exercise control over the personal computer.
2
To do this, when booting the computer press for some time “Delete” key. The tripping of the operating system is not immediately, so you have several times to restart the computer and press the button.
3
Next go to “Section for energy management”(eng.Power Management Setup).
4
Then go to “Settings Wake the computer”. Wake Up Event Setup or Wake Up from S5).
5
Now go to the option “Resume By Rtc Alarm” and put the on-time of the computer on every day. You can put a variety of time settings to 24 hour format. Also worth noting is that your computer will self off every day, because the settings are designed for permanent storage of information.
6
Save all the settings you just made. This can be done by pressing “F10”. Also can hover over the tab “Save” and press “Enter”. Now your computer will turn on at the time which was specified in the system.
7
If you need to change the automatic switch-on time of the computer, can also enter the BIOS and change the settings. If your operating system is a password on user login, you need to disable it because the OS will not be able to automatically turn a slave to the table for confirm the password.
8
This can be done through the tab “control Panel”. Look under “Account”. Next, locate the desired user and click on the “Edit account”. When the password is disabled, press “Save”. Now no problems with automatically enable your computer to not be.
