How to wash foam from clothing

There is a special aerosol cleaner for fresh and hardened foam. In the case of getting foam on your clothes, you quite easily will be able to remove. Apply the cleaner on the stain, soak a few minutes (the duration of the cleaner read on the bottle). Then collect the remnants of the foam with cloth or clean sponge. If there is particles foam on the fabric, perform this procedure again. Removing a stain, try to wash it carefully so as not to damage the fabric.

If there was no special cleaner, you can use other means. This, for example: white spirit, petrol, acetone or even nail varnish. It is less gentle on the fabric than a special cleaner, but they also will extend the life of spoiled things.

The most careful action on the fabric will have a liquid varnish remover. With caution use white spirit, acetone and gasoline. Thanks to these funds, the foam, dissolving, competing to soak into the fabric, so apply the thinner in small quantities, for example by using cotton swabs.

Choosing the solvent, pay attention to the quality of fabric and depth of penetration. If the fabric is dense (workwear, outerwear made of thick fabric, fur) to deal with a spot is much easier, usually, in such cases, the product can be put in order. But this is not the case with delicate fabrics. Many solvents can seriously damage the fabric. But, if you act carefully, but surely we can achieve a positive result.

In any case, do not smear the fresh sticky spot trying to remove it mechanically. Wiping the foam, you run the risk of RUB it into the fabric, and wash thing will be much more difficult. Before applying remedies to remove stains, gently cut off the whole luxurious volume foam with a sharp knife. Soak the cloth in the place where you stuck the foam back on and wait half an hour. Prepare your chosen solvent.

Do not rush to apply the solvent directly on the stain. Experiment first on a less visible place to check the resistance of the fabric to the tool. RUB on a small area of the garment with solvent and make sure he doesn't eat paint and does not spoil the texture of the fabric. If everything is in order, proceed to the removal of stains. Moisten it with solvent and using a brush to remove the foam. Evaluate the result and repeat procedure if necessary. After treatment with solvents purified place sasteria in soapy water to remove the chemical compound. Do it as quickly as possible, since the solvent continuously continues its devastating effect on the fabric.

If the fabric has a small droplet size of the mounting foam, then cut them neatly with a knife or nail scissors. Loosen the foam remains an ordinary needle. The foam pieces, carefully cut with scissors or brush. If necessary, use a solvent.