Instruction
1
If foam gets on your clothing, it is possible to completely clear, and after it dries. It is important to use specially intended for this tool. Do not use thinners or acetone, so that the dissolution occurs the penetration of the remnants of the foam into the fabric, and then under the action of sunlight spots will appear in yellow.
2
Scouring powder and soap solution in this situation also does not help. Here you need to use a special cleaner foam.
3
Before you apply the cleaner, try to gently remove as much of the foam with a knife. Be careful not to damage the fabric. Thoroughly shake the container of cleaner and wipe the place of contamination.
4
Be careful: the composition of the cleaner included acetone, so you should not RUB the soiled area of the fabric. Leave on for 15-20 minutes. When polyurethane foam is softened, gently remove it with a clean sponge, and a better brush, moving in the direction of the fibers of the fabric.
5
If the foam is not completely removed, it is recommended to repeat the cleaning procedure again. Please note, not whether the damaged tissue. If everything is in order, it is possible to increase the time of using the cleaner. If the fabric deteriorates – with less. After a complete cleaning, wipe it with a damp cloth or rinse with warm water.
6
If the contamination is old, and since getting on your clothes it took several hours and more, it is recommended to use a special cleaner for cured foam, however, it should be used with greater caution because of its composition, as its main purpose – remove dried foam with hard surfaces. It is unknown how will the painted surface.
Follow the recommendations and you will get rid of stains-both fresh, and frozen foam.