Advice 1: How to return the screen settings

Getting used to particular settings screen, the user feels uncomfortable if suddenly some parameters stray. To return the display to the old look, you may have to work with different elements.
How to return the screen settings
Instruction
1
The basic parameters are set via the component Screen. Click the right mouse button on an empty area of the desktop and click the last item is "Properties". Opens a dialog component. Alternative method: click the "start" or Windows button, click "control Panel". In the category "appearance and themes" click the "Screen".
2
In the dialog that appears, navigate to the "Settings" tab. To set the resolution, drag the slider to the right or left in the "Permission screen". In the "color Quality" choose the desired value using the drop-down list. To open the other settings window, click on the "Advanced"button.
3
Note the tab "Monitor" and "monitor Settings". If you have a tube monitor, select from the drop down list the value for the refresh of the screen, pre-marking a token box "Hide modes which the monitor cannot use". Apply the settings.
4
The boundaries of the workspace are set via the control panel on the monitor. Using the buttons, enter the menu, adjust the height and width of the image on the screen. Also you can adjust colors, brightness and contrast. When you're done, click on the Degauss ("Demagnetize") or select this command in the monitor menu.
5
Also for the settings you can use the control panel of your graphics card. Open it, click on the corresponding icon in the notification area on the taskbar, or any other way (through the component "Screen" or from the subfolder with the name of the video card in the Program Files folder).
6
On the control panel for graphics settings available the basic parameters: resolution, adjusting the size and position of the desktop, color saturation, brightness, contrast. Also here you can set the mode in which the display is rotated 90 or 180 degrees. Navigate through the sections by choosing the settings required for editing. When you're done, save the changes click OK or Apply.

Advice 2: How to return the screen resolution

Resolution – a term applied to images in digital form. "Picture" of the desktop and all the icons on it are also a digital image. What screen resolution is selected, will depend on the appearance of your desktop and all the startup files (small or large icons of folders and files, their normal or distended appearance, the appearance of signatures to files, and so on). To return to the old or install the new screen resolution in just a few clicks.
How to return the screen resolution
Instruction
1
To configure the screen resolution, open the control panel via the start menu". When you display the control panel by categories, click "appearance and themes". In the window that appears, or select the task "Change screen resolution" or click on the "Screen". If control panel is in classic view, just select "Screen" by clicking on it with the left mouse button. A window will open "display Properties". To change the display of the control panel by category to classic view and back, hit the appropriate command-the inscription on the left side of the dialog box control panel.
2
The window "display Properties" can be accessed in another way. Click from the desktop in any free folder and file location, right-click. In the drop-down menu, select last line "Properties" and click on it with any mouse button. In the opened window go to the tab "Options".
3
The Settings tab is divided into several parts. At the top you will see a visual display of your monitor. If you have multiple monitors, select which monitor you will apply the new settings. To do this, click on the monitor image with the left mouse button to podsuetilis frame. If you have only one monitor, leave it unchanged.
4
To change the screen resolution of the selected monitor under "screen Resolution," located under the tab visual display of the display, drag the slider to the desired position and click "Apply". Desktop configuration changes, you will be given a few seconds to evaluate the result. If you are satisfied with the new display, confirm by clicking in the window warning click "Yes". Close the properties window by clicking OK or the "x" icon in the upper right corner of the window. If you are not satisfied with the new screen resolution, pressing "No" will return you to the current settings.

Advice 3: How to demagnetize a TV screen

It happens that on the screen of CRT of color TV having color distortion due to magnetization of the mask. To correct this situation by a technique called degaussing.
How to demagnetize a TV screen
Instruction
1
Disconnect the TV from the mains and wait until the PTC (a thermistor with a positive thermal coefficient of resistance) in the circuit loop of the demagnetization cools down. It may take up to half an hour. Then restart the machine. There will be an automatic demagnetization. If it does not work, repeat the procedure several times.
2
The monitor is usually a relay that disables the connection and the coil from the mains once carried out its demagnetization. So it cools even when the monitor is enabled. Again to demagnetize the picture tube, it is sufficient to select the menu display option called Degauss. Remember, again successfully demagnetize the mask of the tube will be only half an hour (until the connection is hot, when you select the corresponding menu item, the relay is clicking, but the demagnetization is not performed, and moreover, every such attempt to re-warm up the connection).
3
If the picture tube is magnetized so much that demagnetize its internal loop fails, use an external demagnetizing inductor. Take it for a while in teleatele. Remove from the room at the time of any diskettes, audio and videotapes, Bank and discount cards, tickets with magnetic stripe - all of which can be degaussed with your TV or monitor. Turn on the TV or the monitor, put the throttle a few meters away from him, then turn in too. Slightly moving the throttle from side to side, slowly put it close to the machine, it will cause severe color distortion. As slowly take it back, and only a few metres from him off. Then the color distortion should disappear. If not, repeat the procedure several times. Do not hold the throttle for a long time included to exclude heat.
4
In the case, even if the demagnetization of the external choke is not led to the desired result, the apparatus is disturbed convergence. The adjustment entrust to a specialist. This is connected not only with a TV or monitor high voltages, but with the complexity of the procedure - it will take not even just the technician.
Is the advice useful?
Search