You will need
  • - antiseptic;
  • gel or acrylic;
  • - UV lamp;
  • silk or fiberglass;
  • - saw blade;
  • - shape;
  • - bath for hands;
  • - hypertonic salt solution.
If broken one of the nails, it is easiest to trim the rest. But often the client wants to retain length. In this case, use of such materials as silk or fiberglass. Apply it on the gel or glue, are laid on the damaged nail, let dry and carefully sand the nail file. The gel polymerize in the UV lamp, and then fasten a thin reinforcing layer, and again hold it under the light. You can also do a double reinforcement to the nail was stronger.
If the nail is injured badly, and it leaks blood, even in small amounts, provide first aid. Treat the damaged area with antiseptic to avoid infection, and then make a hypertonic salt solution, adding a liter of warm water a tablespoon of baking soda, a teaspoon of salt and 5-6 drops of iodine. Dip your finger with broken nail in the solution for 15-20 minutes, then rinse with hydrogen peroxide, dry cloth. Now you can combine the broken edge of the nail and gently glue it with gel or Biogel.
Extend a nail, put it on a form. Cover with gel or Biogel, then fiberglassed. Latest apply so as to cover the lower part of the nail and damaged area with a margin of approximately 2 mm. Cure in UV lamp for 2 minutes and apply another layer of gel. Again, put the nail under the lamp, and when it dries, coat the sculpture gel and simulate as necessary.
You can also extend the damaged nail with monomer and acrylic powder. Cut a one-off form so that it does not touch the wound and only in contact with a healthy surface. Before gluing Bessarabia nail "Sterilium", "Calasept", hand sanitizer С1М1 or 5% alcoholic solution of iodine. Use a primer that does not contain acid. On the form carefully apply the acrylic. When dry, very carefully opalite.