In extreme cases, to save the manicure will allow ordinary office tape. You need to cut a small piece of tape and carefully apply it to the outer surface of the fracture. This should be done carefully so as not to remove the varnish layer from the surface of the nail. Protruding edges of the tape carefully cut across the surface of the nail.
The repair of the nail is not absolute salvation and allows in extreme situations to save manicure for a few hours. Later, the damaged nail will either crop or stick.
Minor damage to the nail can be glued by a retaining nail Polish. Use this method only if the damage is located on the regrown part of the nail and do not hurt the skin. This will require to first wash hands thoroughly and degrease the surface of the damaged nail.
Before treatment, broken surface of the nail should be completely dry, so you can use a towel, cloth or even a Hairdryer.
Using a toothpick, fixing the varnish carefully applied to the surface of the damage. It is necessary to coat the tool deep enough so that the glue grabbed.
Next, the surface of the damaged hard pressed with a finger of the free hand that allows you to squeeze out the excess funds. They should be removed from the surface of the nail with a liquid varnish remover and cotton swab.
After drying you need to spray a base coat and two coats of ordinary varnish. It should be remembered that this method will allow for some time to store the length of the nail, but needs care. A few days procedure have to repeat.
More long-lasting effect provides normal household glue. Its application should be resorted to only if the damage is formed on the regrown part of the nail. When selecting an adhesive, it is necessary to pay attention to component composition, which should contain cyanoacrylate – bestrolexreplica component that contains, in particular, in the legendary glue "Moment".
Glue is likewise applied to the surface of the damaged nail with a toothpick. The only difference is that it is necessary to very carefully apply glue to in addition to a broken nail is not glued to the fingers. After applying the layer of glue does not need to keep the damaged fingers, it is better to confine a small amount and gently connect the damaged part of the nail plate.
It is important to start applying the varnish only after the glue is completely dry. If the nail plate will glue remains, remove it with the help of liquid varnish remover or polishing nail file coarse fraction.