Advice 1: How to enable the MTS

On the official website of MTS you will find information to enable the second line on your phone. That's because subscribers who concluded a contract in 2009 and later, this option is enabled automatically. If you use the services of MTS for more than three years, the second line can be connected independently.
How to enable the MTS
You will need
  • phone
  • - SIM card MTS
Instruction
1
Go to menu of your mobile phone and select "Settings". They find a tab called "Challenges". Browse through to appearance on the screen "call Waiting" - select this function. A new window will open with the functions "Insert", "Cancel", "Status". Click "Enable". The screen will display "Running query". About the positive result, the phone will alert you with the phrase "call Waiting enabled".
2
The inclusion of the second line of the MTS through the settings of the phone came the message "Not out"/"call Waiting is not enabled". This situation could occur for several reasons. First: you have powersil try activating out of coverage. Second: when the query operator is "frozen". Third: the fault of the phone.
3
Wait for a while, change a place of stay or reboot the phone. After you follow these steps, then try again. At repeated failure - see 4
4
Activate the service through the command request in the MTS. Dial *43# and press call. Your number will be automatically connected to the desired option and you will immediately notify the system.
Note
Now when a second incoming call you will hear beeps. You can reject it to send a Busy signal or receive.

When setting the first source in the standby mode note: when the call was made by you, the copying of the funds will continue in the usual manner. The fee for an incoming call depends on your tariff.
Useful advice
In some phones, in the settings, the function "call Waiting" is called "Waiting/call hold".
This service is available to MTS subscribers free of charge.

Advice 2: How to connect a second line MTS

"Second line" MTS gives the subscribers the opportunity not to miss any significant calls. Before man can reach, even when he's already talking to someone on his mobile phone. During a call, received a signal informing on the second call. You can answer incoming call or call another subscriber, keeping already ongoing conversation.
How to connect a second line MTS
You will need
  • mobile phone number of MTS
Instruction
1
The service is "Waiting and call hold" ("Second line") are automatically connected on all tariff plans to the new subscribers from March 13, 2009 and does not require additional actions from the customers of MTS.
Those who joined MTS before March 13, 2009, but wishes to use the Second line needs to dial a free command - "asterisk"-4-3-"the grille" - and click "call".
2
By dialing "star"-"pound"-4-3-"lattice", you can check the service status "Waiting and call hold".
To deactivate the service "Second line" you need to type "grille"-4-3-"grating".
3
When during a call you receive a second call, the subscriber may continue the conversation, not paying attention to the audio signal.

Also the service is "Second line" allows for the rejection of the incoming call. If the caller presses 0, the caller will hear a busy signal. When you press 1 the client, MTS will end up active conversation and will respond to a new challenge. Button 2 during the "Second line" means the acceptance of the challenge. You can change the call status: active hold, and held to make active.
Note
The service is "Waiting and call hold (Csile activation for free. The usual fee charged for two calls at the same time in accordance with the terms of the plan, and depending on the direction of the call, as during a call, the subscriber holds two channels.

When connecting to rooms 0890, 0850, 0880, 112 "Second line" does not connect.
Useful advice
Currently MTS network can provide to the clients at the same time only two rings is held and active. To answer the third incoming call, need to finish one of the previous.

Advice 3: How to connect a second line on the phone

The second line on the phone connects often with often occupied the first line, when there is a lot of calls, and one or more of them may be important.
How to connect a second line on the phone
You will need
  • with the support of the second line.
Instruction
1
To connect the second line in your phone call technical support of your mobile operator and connect the call waiting service. In this case, during your conversation with one person call from the other will be in standby mode, you will be able to make a call on the second line independently, without interrupting the first call.
2
Please note that during the conversation, you can switch between the subscribers. Also in some cases of true connection is a conference connection. Also, when using the second line you have reduced the number of opportunities to miss an important call, especially if you have caller ID. This service also connects the operator or local office of the CTA.
3
To connect the second line to your landline phone, please contact service office provider of telephony services with the relevant requirements documents. Fill in the application form, a sample of which you can find in the waiting room, and wait for the processing of your application, after which your phone will be connected to the second line.
4
Make sure that your handset supports such a mode of conversation, if not, buy a new landline phone that supports a conversation on two lines. These can be bought in the salons of cellular communication and points of sale of household appliances.
5
In order to connect the two active SIM-cards, purchase special telephone. In this case, note that some of them just have in its construction the adapter for the second SIM card, and between them has to switch. The newer models support both cards operators at the same time. Set the call parameters in the relevant menu.
Useful advice
Connect a second line to mobile when you register the SIM card.
Search
Is the advice useful?