Instruction
1
First of all, turn off the water supply to the machine and disconnect it from the mains. It is also desirable to wait a period of time, 10-15 minutes, because some models have nodes that are completely de-energized only after this time.Remove the sewer drain hose and put it in a bowl or in any other way will lower it as low as possible to drain the remaining water in it.
2
Find out from the user to the machinewhere the plug for the water filter. Often the manufacturer has it in a plastic false panels in the lower part of the front side of the machine. Gently pull the panel towards yourself to release it from the slots. Don't put a lot of effort, otherwise you may damage the fasteners of the cover. While remove the cover to the side. Locate the filter cap - it is round in shape and has a special shape so it was easier to hold with fingers.
3
Next, you may need a rag for the floor. Put her cushion on the floor in a semicircle, thus locking space around the filter. The fact that the filter is a certain amount of water, and when you open the filter it pours out on the floor.
4
Remove the filter cover by rotating it counterclockwise. Inspect the opened hole and from there remove all foreign objects. To clean the filter in the washing machine you can use a kitchen sponge, using her tough side. Check the condition of the water pump impeller, which will be located in the depth, and remove it from possible contamination.
5
Reassemble the filter in reverse order. Close the decorative cover. After that, reconnect the drain hose and the electricity, turn on the water supply.