You will need
  • - dye;
  • a large enameled pot;
  • - ammonia;
  • - salt;
  • - vinegar;
  • - a thermometer;
  • - rubber gloves;
  • - scales;
  • - wooden tongs.
Instruction
1
Review the composition of the material from which is your thing. Pick up dye for the product, depending on the type of yarn. Given the weight of the fleece in a dry condition, determine in accordance with the instructions of the required amount of paint. The color intensity will depend on the ratio of their weight in the dye solution.
2
Prepare product for painting. Fight back buttons and metal hardware: hooks and clasps. Wool, wool blend or cotton knit wash in a neutral detergent solution or in a solution of ammonia (50 g per 10 liters of water), Rinse and wring out, without twisting.
3
Prepare product for painting. Fight back buttons and metal hardware: hooks and clasps. Wool, wool blend or cotton knit wash in a neutral detergent solution or in a solution of ammonia (50 g per 10 liters of water), Rinse and wring out, without twisting.
4
Color sweater from cotton yarn. The wet product is put into warm dye solution (50 degrees). Bring contents of saucepan to a boil and after 20 minutes, pour the solution of salt (2 tablespoons for 1 packet of dye). Constantly turning over the jacket, continue dyeing in boiling water for 40 minutes. Set aside the pan from the heat, but keep stirring for another 30 minutes. Rinse the sweater in warm water, unfold and lay out to dry.
5
The yarn of which is connected to a jacket, may contain different fibers: wool, cotton, artificial yarn. To get a uniform color for such things, you need every kind of fiber to paint under certain conditions. If the composition of the yarn is more wool, dissolve the dye in water, heat to 40 - 50 degrees and submerge it in the product. Bring the liquid to 100 degrees and simmer for 40-50 minutes. That shirt does not pop up, constantly podpravlyaya. Then dokrasit cotton thread. To do this, cool the solution to 80 degrees, add the ammonia solution (5-10 g per 10 liters) and within 30-45 minutes it leave product. Thoroughly rinse the shirt in warm water and dry flat on a horizontal surface.
6
If you are not satisfied with the uniformity of the new color, prepare the product to a secondary color. Heat water to 100 degrees and add to the boiling liquid ammonia (50 g per 10 liters of water). Dip dry shirt for a few minutes and then rinse. Make fresh dye solution and repeat the procedure of dyeing for 30 minutes. When all the conditions are met the solution will be bright, and your thing will get the desired color.