You will need
- construction Hairdryer;
- - hair dryer;
- - vegetable oil;
- - sponge;
- - solvent acrylic adhesive;
- - solvent means;
- - essential or eucalyptus oil;
- - stationery knife;
- - cleanse for me.
If you need to remove bilateral adhesive tape from any surface, use a special solvent acrylic adhesive. Before that, heat the tape using a Hairdryer. Remove the polypropylene or foamed basis, apply the solvent to a sponge and use it to clean off glue residue.
Use acetone, gasoline, kerosene, white spirit, solvent 646. Heat the tape using a hair dryer, remove the base, apply one of the means to the sponge will remove the glue residue.
Instead of building dryer you can use a hair dryer. It is possible to heat the entire surface of the base, but only the edge to hook the tape on and off.
Acrylic adhesive begins to move away from the surfaces, if it is abundantly grease with oil. For these purposes, you can use any vegetable oil. Put the sponge, liberally lubricate the tapeand leave for 12 hours. Through this time period you can easily remove it without the use of thermal methods. Remaining oil and glue remove with any solvent compositions.
If you remove the tape from the glass, instead of the solvent may use an x-ACTO knife. Remove the base, gently scrape off the glue residue, clean the glass using the cleanse for glasses that you can buy in any store for motorists.
Do not attempt to wash surfaces with acrylic adhesive residues with detergents or cleaning agents. The adhesive on the bilateral adhesive tape, it is not exposed to wet and remove it with plain water and detergents you will not succeed.
If you need to remove adhesive from a painted surface, do not use the heating method and solvent means, as you can damage the painted base. To remove the tapeand lubricate it or eucalyptus essential oil, leave for a few hours, remove the base. Remove glue residue from the surface with the help of cleanse for glass, which will not harm the varnish.
Advice 2: How to remove glue from glass
The adhesive may remain on the glass when carrying out the paint work, when the edges of the glass stick with masking tape or on a glass table by careless use of glue with no wipes, and after removing tinting from car Windows. To remove the glue in different ways.
You will need
- - universal cleaner for glasses;
- - white spirit;
- - gasoline;
- - kerosene;
- - acetone;
- - solvent;
- - liquid nail Polish remover;
- - ammonia;
- - a means for washing dishes;
- - an x-ACTO knife with a blade;
- - blade razors;
- school eraser;
- - a cotton ball;
- - sponge;
- - microfiber cloth.
The most convenient and secure option for removing any kind of adhesive with glass is the use of universal cleaner that you can buy in any automotive store and a hobby knife with blade.
To use apply the wiper on contaminated sites, wait one minute, scrape off the glue with a utility knife. The glass in this way are not damaged, as the wiper as much as possible will soften the glue stain, and the box blade very gently remove any debris from the glass.
If the universal wiper you have, and go to the car shop do not want, then apply a cotton pad with acetone, white-spirit or solvent wipe the stain from the glue. Wait 15 minutes, again liberally wipe the stain and scrape off with a utility knife.
Likewise, you can use gasoline, kerosene, liquid varnish remover. Apply glue on the stain, wait 15 minutes until it melted, scrape with a utility knife.
If the knife is not, then you can use a standard blade from a straight razor. To avoid injury, secure the blade at the end of a school eraser.
Can also use a solution of ammonia and detergent for dishes. For the preparation of the composition, add 1 tablespoon of ammonia 1 tablespoon of any liquid detergent for dishes. Thoroughly mix the composition, apply the stain from the glue with a sponge. Within the hour, constantly rinse the stain from the glue. Softened remove the stain, use a utility blade or a regular blade.
After removing the adhesive, clean all glass using conventional windshield wiper or water and ammonia. To prepare the solution, pour into a container 5 liters of water, add 1 tablespoon of ammonia, wipe the glass with a soft cloth and napoliroma to Shine with the microfiber cloth.