How to remove the drum from the washing machine

If you decide to do this procedure yourself, without resorting to the services of professional master, you must adhere to the following sequence of actions. First remove the top panel of the washing machine by using one of the Phillips screwdrivers. Then remove the screws that connect the panel to the housing. Lift the left hand rear side panel, slide it to the right hand front of the machine towards the rear.

With one hand lift the rear part of the panel, then slide the top panel using the second hand towards the back of the wall before it is uncoupled.

Remove the control panel of the washing machine. To do this, pull out the detergent dispenser, Unscrew the Phillips-head screwdriver drawer rail, firmly holding the control panel in one hand, your other hand slide it out at an angle of about 90 degrees to disengage the panel. In this position, turn the panel parallel to the side wall of the washing machine at an angle of 180 degrees. By using the service hook fix the control panel on the side wall of the machine.

Start removing the service panel. Screwdriver Unscrew the two screws connecting it with the side walls of the washing machine. Wooden or plastic peg from the bottom to unhook the panel. Open the hatch of the washing machine and clear the collar cuffs with his door, then remove the cuff.

Remove the center panel of the washing machine. Remove the four screws that secure it to the side walls of the machine. Remove the center panel and disconnect the connector lock the hatch, then the drain hoses on the tank, front counterweight.

Remove the screws and split the tank into two halves. Unscrewing the two screws, slide cover of machine and remove V-belt from the pulley.

Unscrew retaining nut and remove the pulley, then remove the drum washing machine. All operations must be done with extreme care.