How to re-varnish the furniture

Getting to the varnishing of furniture, assess existing damage, prepare the room to work. All surrounding objects and the area where you will be Stripping and varnishing of furniture, tightly cover with plastic wrap, securing it with masking tape. The room must be well ventilated. Nevertheless, restored furniture place in places where there is no draught and direct sunlight.

With a scraper and steel spatulas, remove the cracked varnish. The damaged surface of the furniture thoroughly rinse and remove the remains of the old varnish using wash up solution. Wash away the old nail in a circular motion, causing the composition of the cloth. The entire surface of the furniture to remove the remnants of paint using fine sandpaper. The surface should be matte and smooth. The dust from the surface, remove with a brush. Contaminated surface clean with white spirit, applied to the sponge, removing grease spots and accumulation of dust.

Since varnishing the furniture you need, having absolute flatness of the surface, apply a primer for wood. Apply the primer by brush on the dried surface. It is desirable to make two layers. After drying, each of them smooth the surface with fine emery paper. Not to spoil the texture of the wood, move the sandpaper in the direction of the fibers.

Nail Polish apply in 2-3 coats. After each application you must wait for the complete drying of the media. You should also inspect the surface of the furniture and remove all defects by grinding. Cover furniture varnish, taking the paint brush in the direction of the fibers.

The effect of a deep gloss can be obtained if the last layer to perform liquid Polish and to make polishing with a solution of kerosene. As a finishing touch, remove from the surface of varnished furniture the remnants of the oil solution with a clean cloth.