Instruction
1
Before you connect a WAP service access make sure the mobile phone supports WAP and GPRS. This information can be found in the phone manual.
2
In order to connect to the Internet from the operator Beeline and get automatic settings on the phone, send an SMS message with the text of W at the 800 number.
3
The phone will be sent the settings must be saved in the phone memory. In some cases, when you save the mobile phone will ask to enter the pin code (0000).
4
In case an sms with the settings it's not, configure the phone manually. Go to menu, select "Settings" -> "Internet" and use the following settings: IP port 9201 (or 8080), a secure connection is disabled, session - permanent access point wap.beeline.kz access via - GPRS user name - @wap.beeline, password - beeline prompt for a password - no authentication - normal IP Address of the gateway 172.027.006.093.
5
Connect special package, 09051 in sending SMS to number 0674. After you receive a notification of the service connection, disable and re-enable the phone.
6
To connect Internet operator Kcell send SMS message with text wap to number 800. The phone will be sent the settings must be saved in the phone memory. In other cases, you must activate the service through the offices of the operator and manually configure the phone using the following parameters: proxy address/IP address is not used, the proxy port is not used, the access point - internet; proxy address/IP address - 195.047.255.007, proxy enabled, proxy port - 8080, APN - wap.