You will need
  • - pliers;
  • - crowbar;
  • - "cutter"
  • - wrenches;
  • - Phillips and flat screwdriver;
  • service hook
Remove the top cover of the washing machine. For this you need to Unscrew the screws holding the panel to the casing of the washing machine. Carefully lift the cover and slide it back. Make sure that the tabs holding the cover, was released. Disconnect the upper cover.
Remove the control panel
Remove the dispenser drawer detergent, lightly pushing him. Unscrew the screws securing the drawer on the front panel of the washing machine. Hold the control panel of the washing machine on the right side and slide it to the left side by 90 degrees. Make sure that the panel is disconnected from the mounting bracket. Carefully open the control panel to the side wall of the washing machine and fix it with the service hook.
Remove the service panel. To do this, loosen the screws holding the service panel to the two side walls of the washing machine. Gently pry the service panel with a crowbar and remove it.
Remove the heater. For this you need to disconnect the wire from the heater and remove the nut that secures the heater.
Remove the drive belt and Unscrew the screws fixing the manifold to the engine. Disassemble the engine.
Open the car door. Using a flat screwdriver pry and remove the front part of the clamp of the hatch door. Disconnect the cuff of the washing machine from the front panel.
Remove the front panel. For this you need to Unscrew the screws that connect the side and front panels of the washing machine.
Disconnect the connector lock of the door. Disconnect the hose from the dispenser. Then remove the hose and cuff pressostat door.
Remove the cuff of the hatch. This requires slightly loosen screw cuff located on the tank, remove the clamp cuff, disconnect the cuff and remove it from the drum of the washing machine. Washing machine is completely disassembled.