Advice 1: How to change network name in Windows 7

The name of the local network is specified in the creation process or when the operating system first detects the network connection the next time you turn on the computer. Once the specified name can be modified afterwards - this is available in Windows 7 and is very easy.
How to change network name in Windows 7
Instruction
1
To get to the form with a field to change the name of the network is possible using one of the applet "control Panel" of Windows 7. To start panel, open the main menu of the OS, and then click its name in the right column. Under "Network and Internet" panel, click "View network status and tasks", and the screen displays the desired applet.
2
This applet can be run in several other ways. For example, move the mouse cursor over the network connection icon in the lower right corner of the taskbar and click on it with the left button. In the pop-up window to initiate the applet is designed to link the "control Center network and sharing" - it also left click. But if you open "Explorer", the same can be done via the context menu of the object "Network" - it is invoked by clicking the right mouse button. In menu, select "Properties", and need a tool to "control Panel" will be launched.
3
In an applet "control Center network and sharing" the right part is divided into several sections. The second from the top is subtitled "the View your active networks" and contains in the left column an icon, a title and specify the type of network. To edit the name click the left mouse button on the icon. The desired form will appear in a separate window.
4
In the field Network name replace the old name with the new one. If necessary, this form can be changed and used to show the network icon. To do this, click "Edit" and select from the opened set of the most suitable icon. If there is nothing worthwhile there, you can click "Browse" and look for symbols in other dynamic libraries (extension. dll) executable files (exe), icon files (ico) or the picture graphic formats (bmp, gif, jpg, png, etc.).
5
To complete the operation, click OK, and then close the "control Panel".

Advice 2: How to change active partition

Failures in the hard disk can cause the operating system will no longer load correctly. Sometimes, problems with Winchester are the cause of severe performance degradation of your computer. Proper manipulation of the disk partitions allow time to correct these failures.
How to change active partition
You will need
  • - A Windows installation disc.
Instruction
1
To change the active partition you can use standard operating system utilities. Of course this is feasible only if Windows is loaded correctly. Click "control Panel". Usually it is a shortcut located in "start menu". Select the submenu "System" or "System and security".
2
Open the "administrative tools". In the window that appears, select the shortcut "computer Management". Expand submenu "mass Storage device" and click "disk Management". Locate the section of the hard drive and click right button of the mouse.
3
Select "mark partition as active". In the window that appears, click "Yes." Then restart the computer. Remember that the operating system will not boot if you select the wrong section of the disk.
4
If you need to change the active partition without access to the OS, then use the command line (Windows 7) or recovery console (Win XP). Access to these utilities can be obtained through the installation discs of Windows.
5
Insert the desired disk drive and load the recovery console. To do this, press the R key in the corresponding window or choose the item "Command prompt". Launch this utility.
6
Type the command fdisk and press Enter. Press Y to confirm the start of the program. Now press the number next to where it says "set active partition".
7
Select the local disk you want to make active by pressing the corresponding number. After the program is completed, press Esc.
8
Remove the drive working drive and restart the computer. Wait for loading the operating system.

Advice 3: How to change the computer name on the network

When you access a disk, folder or optical drive of another computer on the local network, the system uses the addresses of these objects and devices that include the network name of the remote computer. As the printer, flash drive and others connected to someone else's computer peripheral devices. To change this network name in the settings of the operating system.
How to change the computer name on the network
Instruction
1
The settings window pertaining to the network name of the computer is invoked using one of the applet "control Panel" Windows. Reference to this panel is placed in the main menu of the operating system - click on the "start" button and select in the right column of item "control Panel". In the opened window, click "System and security" and then "System". After that, the screen displays the desired applet. However, all these actions can be replaced by a pair of pressing "hot keys" Win + Pause.
2
In the applet there is a separate section with the heading "computer Name, domain name and workgroup settings" from the right edge where you placed the link "Change settings". Click it to open the window, change some properties of the system. Access to them requires the user to have administrator rights. If you are logged in not as administrator, then on screen a dialog box appears requiring to enter a password.
3
On the tab "computer Name" in system properties, click "Edit", and then, finally, a window will appear with a field "computer Name", whose value you need to change. Enter a new network name, following the standard rules for Internet names. They are allowed to use only letters of Latin alphabet as well as numbers and some symbols with the exception of special. Prohibited are, for example, < > ; : "* + \ | , ? =. Microsoft recommends using short and descriptive names are 15 characters or less. In addition, they should not consist only of digits and cannot contain spaces.
4
Then click OK and close the "control Panel". If the computer is on a domain, you are prompted to enter the password of the user who is allowed to change the names of the domain computers. And if the domain is not being used, please note that other computers on the local network will try to find the resources of this computer (e.g., network drive) at the same address. So you'll need to manually change the name in the address of the network resource or disconnect it and connect again.
Note
In this article we will talk about how to change computer name in Windows 7. This is done quite simply, just a few steps. The name of the computer usually used to identify it on the network and is set when installing the system. Find out the name in the properties of the Computer (in the start menu). To change the name of computer follow the sequence of actions
Useful advice
Change the computer name. Every computer on the network must have a unique name so that computers could uniquely identify each other and interact. Most computers have the default names, but usually they are possible to change. It is preferable to assign the computers a short (no more than fifteen characters) and descriptive names. For the computer name it is recommended to use only Internet-standard characters.

Advice 4: How to change computer name in Windows 7

Personal computer name in Windows operating systems, is used to identify it on the network. The computer name must be unique within the home network. The user can change the computer name in its sole discretion at any time.
How to change computer name in Windows 7
Instruction
1
Open the library "Computer" and click "system Properties" located in the top menu. Opens a window view basic information about your computer. Also the source window you can open by running the "start menu" and typing in the search box "search programs and files" query text "system". In the results list, you must select "System".
2
In the "computer Name, domain name and workgroup settings," click the line "Change settings". A window will open "system Properties".
3
In the window that appears, activate the tab "computer Name". This tab displays information about the computer, used to identify it on the network.
4
Open the tab, click "Change...". Window opens the "Change computer name or domain".
5
In the text box "computer Name" enter the new ID and click Ok.
6
The computer name is often referred to the name of the user account, i.e. the name displayed in the upper right corner of the start menu and when you start the computer in the unit of account selection. To change the account name, click "start". It hit the left mouse button once on the picture of the user account located in the upper part of the menu. A window will open make changes to your account.
7
In the opened window click the line "Change your account name" and enter the desired text in the text box "New account name". Click "Rename". The account name will change to a new and appears in menu "start".
Note
The computer name must contain only regulated by the operating system symbols. Therefore, you can enter certain characters in the text the name of the computer I get the error message "the computer Name must not contain forbidden characters" listing of invalid characters. In addition, the computer name must not consist of only digits and must not contain spaces.

The name of the computer connected to the network must be unique, short and easily understood by users. When matching the names of the computers connected to the same network, the system generates an error and resets the network connection. In this case, you must rename one of the computers.

Some providers require you to use specific computer names. This is done to identify the personal computer in the network and the authentication account. In this case, the user is forbidden to change the computer name.
Search
Is the advice useful?