Advice 1: How to set the clock on your desktop

Working on the computer, you can always keep track of time. Special section – clock – by default is located in the lower right corner of the workspace. If desired, system icons, including clock, you can enable and disable.
How to set the clock on your desktop
You will need
  • - personal computer;
  • - operating system Windows 7.
Instruction
1
The icon "clock" available in all versions of Windows operating system. Standard, it is not always comfortable viewing, especially if the user has vision problems. But at any time you can install your favorite picture hours. Windows allow to do it for a few seconds. Particularly useful in this regard, the seventh version of the operating system.
2
The notability of Windows 7 is that in its settings there is already a small stock of a variety of applications-gadgets with the image of the clock. To install them on your computer, you need to right click anywhere on your desktop. Then in the opened window, select "Gadgets". Open it and go to "Clock" by double-clicking on the appropriate icon.
3
Then on your desktop will appear an additional icon hours. If the default version of the pictures you do not like, replace it with a more suitable one. To do this, move the mouse cursor to the clock icon, click on that appears to the right spanner and navigate to "Settings". Here you can set basic settings of this element and change the picture. To do this, click on the side arrow in the window of the gadget and select any image.
4
If you are Windows 7 options not suit you, you can use the search on the network for a multi-language site Microsoft or any other Internet service. For example, a lot of useful applications, including for installation on Desk image hours posted on the website Softportal. Open the page to the address below, choose your app, download and install it to your computer. Run the program and use it.

Advice 2 : How to set the time on the clock

In our time created a lot of different models of watches. Perhaps some people are afraid of how to operate these or other mechanisms so that even to set the time . But all the clocks are now working approximately on the same principle. While they are categorized mainly into two types – mechanical and electronic. Remember how to set the time on a watch like this.
How to set the time on the clock
Instruction
1
Mechanical:

On a mechanical watch there is always a special "wheel" with which to set the time. If it is a manual mechanical watch, it needs a little pull forward and turn the hands clockwise until the digit that you need. If the clock shows seconds, to put a more accurate time you can use the radio or television, that is, synchronize its clock with the clock of the radio station, this will need to wait for the announcement time. After the desired time has been selected, the "wheel" need to be put back exactly at the time of signal transmission time.
2
Email:

Many people think that to set the time on a digital clock is how to understand the computer. In fact, these devices have a special menu and it is possible to set the time. Just need to find the button that is responsible for time, and click it follow the instructions from the clock. Usually after pressing the button, which is responsible for the time digits start flashing, then it's time to start. You need to press a button and the numbers will continue to be rotated, set the time and press a special button (see the instructions) to lock it.

Advice 3 : How to set watches

"Without a clock, without hands" - some complain. And although we're carrying around mobile phones that can always spy time, many people can not do without hours. And how to adjust, our wrist watch?
watches
Instruction
1
In a mechanical watch, and to this day has the same mechanism — the wheel, which we translate.
2
Pull the wheel until a light click. Do not use force, do it carefully.
3
Rotating the wheel, set the exact time.
4
Pound the wheel back in the groove easily by clicking on it. Don't slip the arrows.
5
If necessary, start the clock mechanism. To do this quickly and gently roll the wheel in the fight hand, to remove it from the groove is not necessary. Please note that you need to have not to the full stretch of the spring, enough for 6 – 8 incomplete revolutions.
6
Manufacturers of electronic hours like to approach the matter with imagination. Buying such a watch, please note that the user manual was in Russian, otherwise all the useful and interesting buttons can become useless.
7
Conventional electronic clock standard two buttons: a menu button and a button state change. Press one button — it flashes a number representing hours. Second button to increase/decrease this value.
8
Then again click the first button should be flashing minutes. Their value change as well as the hours value.
9
If your watch buttons more, please follow instructions. But most likely two of them will be to invoke the menus and change the values, and the rest, for example, to call the number, month and year (which can also change), to start the stopwatch, and more.
Again, if there are instructions you can configure all available options.
10
Much easier in this question to people who wear watches on the hand just for beauty. Ask them the time, don't be surprised if they start to dig in the bag in the mobile phone search.
Note
Mode - toggles the stopwatch - then the alarm clock ... in alarm mode Start - adds a value to the counter, Reset - toggles the meters between the hours - minutes Mode again returns to the clock display ...
Useful advice
Date is set similarly to the time, and the stopwatch often in settings not needed. There are electronic watches that have a number of additional functions. In order to define them, you must first understand how to set the clock date and time and then deal with the rest of the functions.

Advice 4 : How to set the time on the clock

The watch can be completely different – mechanical or electronic, wrist or wall, large or small. In any case, they must show its owner the exact time.
How to set the time on the clock
Instruction
1
Find out the exact time that you will put on the clock.
2
If you set the time on quartz watches, pull the wheel winding, which is located at the side of the dial, until, until you hear the second click. Please note that this action must be made while the second hand on the clock will be on the number twelve.
3
Start spinning the wheel so that the arrow was moving clockwise to the desired time record.
4
Set the arrow so that it shows five more minutes of the time that really is.
5
Take the hand back slightly at the position that will indicate the real time.
6
Return the wheel to the movement's winding mechanism to its original position. Please note that at the moment the second hand should come in motion.
7
In a mechanical watch for accurate time, position to the end position at the head of the winding mechanism until it clicks.
8
Begin to rotate in a counterclockwise direction (i.e., toward you). Install so the necessary indicators in time.
9
Return crown winding mechanism to its original position until it clicks, thus bringing the second hand in motion.
10
To set the time on a digital clock, use the corresponding buttons is a Mode button and the Set button. The first button to select the desired mode, and the second click will change the indicators. After set the time, press and some time hold the Mode button - the hours will come into effect and will show the correct set time.

Advice 5 : How to set date and time on the Samsung

Samsung smartphones are running different operating systems: Bada, Android and Windows Phone 7. On any of these phones, the user can set the time and date by selecting the appropriate menu item.
How to set date and time on the Samsung
Instruction
1
To set the clock in the Samsung operating system Bada first, go to one of the screens on which is located the "options" icon. It looks like a shiny gear on a blue background. Click on this icon and a menu will appear. Select "date and time". You will see several input fields to specify the time zone, enter the date and time, select the time format (12 or 24 hours) and method of display date (default is "number-month-year"). When you select fields for the date and time on the screen automatically displays a keypad allowing you to enter numbers.
2
Under the data entry form is a button "Auto-refresh". Click on it to turn the phone clocks synchronization with the clock of the base station. The accuracy will also increase, but possible error by one hour in spite of the fact that the transition to winter time is canceled, the server base station can be configured without taking into account this fact.
3
In the device running the Android operating system, first also find on one of the desktops icon Settings. It looks the same as in Bada, differing only in color: instead of blue background using a dark gray. Select the menu item "date and time". Now, putting the value of some of the items you wish to change, increase or decrease the value of the corresponding setting screen keys with plus and minus. And the button "Automatic" in Android works the same as a button "Auto update" in Bada.
4
If you have a smartphone with the operating system Windows Phone 7, select one of the screens where there is an icon "Settings" in the form of a flat white gear on bright red or purple background. The same background color on this screen and have the rest of the icons, except one, Xbox Live, the background is green. In the appeared menu, select "date+time". Select the time zone manually enter the time and date. But if you want to get a watch phone synchronized with the base station, check the "Set automatically".
Is the advice useful?
Search