You will need
- The computer mouse
Click menu "start".
Go to "control Panel".
Select "sounds, speech and audio devices".
Go to "Sounds and audio devices".
Select the tab "effects".
Uncheck the effect of "echo".
Check the result.
The reason for the echo in the speakers could also be a microphone connected to the computer. In this case, you must mute the microphone.
Advice 2 : How to remove echo in microphone
It is very popular to using the computer for interpersonal communication through text and voice. A microphone is a device that transmits the human voice over long distances using electronic fiber-optic signal wires. But many users face a problem when there is echo in the microphone.
If you want to fix it yourself, go to microphone settings and check the box next to “suppress echo”. In the case where this configuration is not, reduce the volume and microphone sensitivity. It is also a good way to get rid of the echo in microphone and speakers.
If this method fails to remove the echo, you will have to disassemble the MIC to get to the cause of the problem. Take a screwdriver, pliers and, if needed, different values of the keys. True will remove the soft part with a pair of pliers. Next, take the screwdriver and go with it until the sensing element, which is responsible for conversion of voice to electronic pulse. Clean all contacts and check their integrity. If you found the problem, take the soldering iron and restore with it the health of all the contacts in the microphone. The carried out actions will allow to remove the echo from the microphone.
Professional microphone setup - a rather difficult task. After all, you need to take into account different tones to different sound level of the microphone sounded clean, free of noise and squeaks. Entrust this procedure to the experienced professionals who will perform all the necessary work at the highest level. They have the most modern equipment that will allow you to fix the problem in the shortest possible time. Today, there are many workshops where repair and maintenance of various electronic equipment. Take back your faulty microphone, and professionals solve the problem very quickly. Besides the cost of such services available to the wider population of our country.
Carefully use your microphone and other sensitive audio equipment. In this way you will be able to significantly extend its working capital and without additional maintenance. Do not panic, if a microphone is suddenly broke down, read the manual and try to understand the problem yourself. If you resolve the issue failed, seek advice to their friends or relatives.
Advice 3 : How to make the sound louder on the MIC
The microphone connects to a personal computer through a socket on the front or rear panel or through the corresponding connector on the multimedia keyboard. On laptop computers this connector is usually placed on the lateral surface. In all cases it is marked pink. The volume level of the signal from the microphone input can be adjusted by means of the installed operating system.
If you're using Windows 7, then the main menu on the "start" button, select "control Panel". When the system panel is open, click the "Sound" will be launched and the component containing the settings for speakers, microphones and some other devices, divided into four groups (tabs).
Click the "Recording" tab - it placed icons connected device that uses microphones, and line out. Choose the desired device, and then will become active three buttons at the bottom of this tab ("Configure", "Properties" and "default"). The "Configure" button is not related to the microphone as you would think, it refers to the settings of the speech recognition. And you need the installer opens click on "Properties". These settings will open in a new window with five tabs.
Go to the "Levels" tab, set the desired values in the available there the controls, and then click the "OK" button in all three Windows open.
If you are running Windows XP, you should run the control panel through the main menu on the "start" button and select a component "Sounds and audio devices". This will open a window with five tabs - click on "Audio". In the section "sound Recording" select the default device, and click "Volume".
Set the slider in the "Microphone" of the window to the desired value, and then open the window so lock the front, Pereselkov they click "OK".
Elements adjust the settings of the microphone is in the drivers independent or integrated into the motherboard sound cards. For example, if you have Realtek HD, then in the notification area on the taskbar should be an icon. By double clicking on it opens the panel Manager devices tab, the Microphone you must adjust the settings of the noise reduction and the spatial orientation of the microphone. On the tab "Mixer", select in the section "device" Entry in the drop-down list and set the desired level of the signal from the microphone input.