How to paint jeans

We all remember the days when acid-washed jeans were considered all the rage, a symbol of chic and originality. Everyone wanted to get "varenkov" and most often the desired effect achieved in your own kitchen, treating and dyeing the jeans by hand. As the years went on, but jeans with a effect, light wash of color streaks remain relevant and trendy so far.

Instruction

Prepare highly concentrated, almost black solution of 100g. of potassium permanganate and 150 g of vinegar. Mix the two components. Then immediately proceed to the processing of fabrics with this solution. To do this, take a hard brush and apply to the cloth confident, but quick strokes. Drawing the future "varenkov" you can create on your own. For example, now in Vogue small spots, often located to each other.

The next step will be and secure the pattern on the fabric. For this you will need a concentrated solution of freshly prepared gidropirita. Dip into it a sponge, wet the picture with fast movements, while there is a chemical reaction of the components. The original "tie-dye" can be obtained another way. To start, soak the fabric in hot water for a few minutes. Fold the gauze in several layers, and pour into it a handful of bleach, and then carefully tie the cheesecloth. The knot put in a pot or bucket with hot water, soak a few minutes, then remove. Make sure that the lumps of lime are not leaked through the gauze into the water. The resulting solution boil jeans and a half to two hours.

At the time of "cooking" the jeans fabric can be twisted, even tied in some knots – this will give a kind of effect of "ripples" on the jeans. The skillful use of this effect it is possible to "draw" on your jeans original and unique pattern. If you wish, you can repeat the treatment to achieve a more intense color. But remember that a wet fabric always looks much darker than dry.

Another simple way to turn regular jeans into frayed is with the power to RUB the washed wet jeans on a metal grid. To paint jeans in any color so that in the end they got "cooked", is also simple enough for the home environment. This method is suitable for white fabrics. You will need 2-3 grams of the pigment paste of the desired color, 100 ml. of rubber latex, ammonia 25% in the amount of 10-15 ml., 500 ml. of starch solution and 5 liters of water. Make the ingredients uniform solution and thoroughly soak the resulting dye material. After impregnation wring out the cloth and iron. After that things can be washed, to have the first effect "varenkov".

Is the advice useful?